HP Officejet Pro 8610

HP Envy 5055 setup|123 hp envy setup & installation

HP envy 5055 setup is very simple. You can follow these steps for setup and install HP Envy 5055 printer with your system.

Take your HP Envy 5055 Printer out from its box

  • Take out the printer from its box and remove all tape and packaging materials from around the printer
  • Take off the sticker from the control panel
  • Carefully grab the printer’s handles from its side and then lift the ink cartridge access door until it locks into its place
  • Take off any excess tape and packaging material from inside the printer
  • Shut the ink cartridge access door
  • Pull open the input tray towards you to extend the tray, then take off any packaging material
  • Push the input tray forward until it locks into its place in order to close the input tray door

Plug in your HP Envy 5055 Printer Power Cord and set preferences(HP Envy 5055 setup)

  • Plug one end of the power cord into the back-end of the printer, and the other into an electrical outlet
  • Turn the printer on
  • Set your preferences under the control panel and touch your preferred language and country/region; select YES to confirm your choice
  • Set the date and time and then select YES to confirm choice if prompted to do so
  • A welcome screen will be displayed on the printer’s control panel

Install your HP Envy 5055 Printer Ink Cartridges

  • Use the ink cartridges provided in the box with your printer
  • Life open the ink cartridge access door and let it lock into place
  • The carriage will move a little to the left; wait until the carriage stops moving and the printer becomes idle before you continue
  • Take out one of the ink cartridges from its packet. Make sure to only touch the black plastic on the ink cartridge
  • Take off the plastic tape from the ink cartridge
  • Raise the lid of the ink cartridge slot
  • With the ink cartridge nozzles facing the printer, place it into its slot until it locks into its place
  • Shut the lid of the ink cartridge slot to secure it into place
  • Follow the previous steps to install any other ink cartridges
  • Shut the ink cartridge access door

Place standard printer paper into the Input Tray

  • To open the input tray, pull it towards yourself to extend the tray
  • Gently slide out the paper width guides as far out as possible
  • Load standard printer paper with the print side facing down
  • Carefully push the stack pf printer paper until it can go no further
  • Gently slide the paper width guides along the printer paper until it touches the edges; make sure they do not hold the printer paper too tightly
  • Slide the input tray back into the printer, and then select DONE on the printer’s control panel
  • Pull the output tray out and raise the output tray extender
  • The printer should print out an alignment page once done

Align the Ink Cartridges

  • This is a necessary step in order to ensure the best print quality. Use the alignment page from the previous step
  • Raise the scanner lid
  • Put the alignment page with the print side facing down on the scanner glass
  • Position the page along the guides provided around the glass
  • Shut the scanner lid close and then select OK on the printer’s control panel
  • The printer will now align the ink cartridges
  • Once the alignment is complete, select OK on the control panel once again
  • Your hardware is all set up!

Install the corresponding software/driver for your HP Envy 5055 Printer

Now that your HP Envy 5055 PRINTER hardware is all set up, you can install the printer’s software. You must install the proper driver for your HP PRINTER in order to ensure efficiency and smooth running. The compatible driver will depend on the type of operating system your computer uses.

In the meantime, do not connect your printer to a computer until the printer software instructs you to do so!

Download the latest version of the printing software from the following HP websites:

Follow the easy setup instructions for driver installation by answering the system prompts and then make sure to click the finish button once the setup completes. The HP printer assistant will install automatically for printing and scanning.

If you are still facing problem while installing driver for hp envy 5055 PRINTER, please call our toll-free number at 1-877-364-5922 for any HP Printer related issues and help. 123hp.com

Hp deskjet 3755 setup

HP DESKJET 3755 setup and installation guide

Hp Deskjet 3755 – Printer Features

The HP Desk Jet 3755 All-in-One (Hp deskjet 3755 setup)Printer is the world’s smallest home all-in-one printer. It is portable, stylish and inexpensive. It is best for printing photos, especially from mobile devices.Where an inkjet printer is a practically forgotten or hidden device that usually appears for an occasional printout, it defies all the rules of ugliness. It is clean, bright and actually cute! It is an antithesis of those ugly devices and can fit into the smallest office or dorm room. Measuring about 15.86 x 6.97 x 5.55 inches, the printer also has input and output trays neatly folded up. The printer comes with two cartridges plain black and tricolor. This whimsical piece of art is affordable with sparse but efficient controls. Targeted mostly towards casual users the 123hpcom dj3755 is Instant Ink ready, which means achieving ink refill should be a breeze. That makes the printer even more cost-friendly. The 123.hp.com/setup 3755 is fairly quick and seamless. Download the driver and manuals from the website link 123.hp.com/dj3755 or 123.hp.com/setup 3755.

HP Deskjet 3755 Wireless Setup

Windows Wireless Printer Setup

  • To complete the wireless setup on your 123.hp.com/setup 3755 printer, you need internet access and the computer, printer, and router to be turned on
  • You should now install the printer software:
  • All USB cables must be disconnected from the printer
  • Go to the relevant URL that will help you download the software
  • Click on ‘Download’
  • Run ‘HP Easy Start’ and when you are prompted to select your printer, click on ‘My printer is not shown’
    Now in the ‘Printer not found’ screen, click on ‘Continue’ and then on ‘Wireless Network(if applicable)’
  • Now click on ‘Continue’ and follow prompts on the screen that will help you set the printer up wirelessly
  • Download the driver and manuals from the website link 123.hp.com/dj3755 or 123.hp.com/setup 3755.

HP desk jet 3755 Wifi Direct Setup

How to Use WIFI Direct

Most of the HP printer comes with a CD with which you can complete the HP printer driver installation. All you need to do is to run the CD and follow the on-screen steps one-by-one to complete the setup, configure the HP Deskjet 3755 wireless setup. Connect the printer via the Wi-Fi or you can even use the 123.hp.com/setup 3755 USB cable. With the wireless network, the 3755 printer is e-printenabled. You can avail of the cloud service that allows you to print from your mobile device to your printer. Download the driver and manuals from the website link 123.hp.com/dj3755 or 123.hp.com/setup 3755.

Wi-Fi Direct allows you to print from a smartphone, tablet or any other wireless-capable device. There is no requirement to connect to the existing wireless network. To use the Wi-Fi Direct:

  • The computer and device should be equipped with the relevant and necessary software to accomplish the function
  • The computer should have the HP Printer Software installed
    • If you have not installed the printer software
    • Connect to Wi-Fi Direct
    • Install the HP Printer Software
    • When prompted by the software setup, select ‘Wireless’
  • Turn ‘Wi-Fi Direct’ on in your printer
  • A single Wi-Fi Direct connection can be used by up to 5 computers and mobile devices
  • To use Wi-Fi Direct, the printer can either be connected to the computer [with a USB cable] or to the network, wirelessly
  • Press the ‘Wi-Fi Direct’ on the printer’s control panel
  • The Wi-Fi Direct light is steady when it is on
  • Press the ‘Information’ or ‘i’ button for the Wi-Fi Direct name and its password

Print from a device that wireless-capable and supports Wi-Fi Direct:

  • Your mobile device must have the latest version of the HP Print Service Plugin
  • If not, then download it from the Google Play Store
  • Switch on the ‘Wi-Fi Direct’ on your printer and on your mobile device
  • Select a document that you wish on your mobile and choose the ‘Print’ option
  • A list of available printers is displayed from which you can select yours – the name of the printer will be prefixed with ‘DIRECT’
  • For automatic settings, which is the default, the print job will be automatically sent to the printer
  • Press the ‘Wi-Fi Direct’ button on the control panel of the printer if manual settings are ON.
  • A page with the ‘PIN’ code will be printed out
  • Follow instructions given in the printout to use Wi-Fi Direct

Enable Webscan In HP DJ 3755 Printer

 

The printer is adjust to reliable home use but definitely not intended for an enterprise. It does not have a flatbed scanner and in case you are wondering if how, then there is a roller into which you can feed the paper. The roller sucks the paper in, scans it and then sends the output back out. Learn more about it in the 123.hp.com/dj3755 how to scan module. And if you need to scan a page from a book, download app that will allow you to just snap a picture and print it out wirelessly. Though the HP Deskjet 3755 scan to email feature is adopted by the Webscan that allows you to print documents and photos from the printer into the computer from where you can email it.

Copying and Scanning Document Tips

Overall, the 123.hp.com/setup 3755 printer leaves absolutely tiny footprints and comes with the most colorful design. With replaceable cartridges and feed-through scanning capabilities, the copier is an ultra-budget printer that is admired for being so cheap. The control panel is small and has an LCD screen that has a variety of icons embedded on it. The front cover when opened up reveals the cartridge access area, which is easy to access and replace ink cartridges when necessary. When hooked up to the USB cable, the printer is versatile and the Wi-Fi network provides you with extra print capabilities. Use the 123.hp.com/dj3755 for occasional printing as a small format printer. This is HP’s true attempt at taking home printing with the all-in-one 3755 to a whole new level.

YOU MUST FIRST ENABLE THE WEB SCAN TO USE IT:

One among the features of Wireless connection is the Wi-Fi connectivity. Even through Wi-Fi Setup you can connect your 123.hp.com/dj3755 Printer. Follow some of the steps to connect your printer from anywhere.

  • It is really simple to connect your printer to your device through a wireless connection.
  • Turn ON the Wi-Fi button on your printer.
  • Now from your Wi-Fi enabled device, select the document that you want to send.
  • Select your printer name from the list of connected printers.
  • Once you are connected your document gets transferred.
  • Receiving the document, your printer starts to print them.

 

PERFORMING WITH HP DESKJET 2130 PRINTER

 

  • Enabling Webscan:
    • Open the Embedded Web Server or EWS and click on ‘Settings’
    • Then, click on ‘Administrator Settings’ under ‘Security’
    • To enable the Webscan, choose ‘Select Webscan from EWS’ and click on ‘Apply’
  • Using Web scan for scanning:
    • Feed the paper with right side justified and print side up into the scanner
    • The scanner light is turned on
    • Open EWS and click on ‘Scan’
    • On the left pane locate ‘Webscan’ and under it ‘Start Scan’

HP DESKJET 3755 TROUBLESHOOTING

 

HP DESKJET 3755 NOT PRINTING& SLOW PRINT

From the 123 HP DJ3755 troubleshooting guide for any issues you can also get help. The troubleshooting manual should be able to address most of the problems that are also inclusive of the scanner not working and not printing. The HPDesk jet 3755 is best for printing photos, especially from mobile devices. The printer is temptingly attractive and can fit into most space-constrained places. With a modest duty cycle, this device can give up to 1000 pages per month. You can setup the printer with your Smartphone and print your photos from Instagram, Face book or Twitter. The printer costs just about $70 and can easily fit under your arm. It prints at a speed of 8 ppm for black and 5.5 ppm for color, which is because of its compact nature.

 

 

DESK JET 3755 Slow On Windows 10?

  • The default paper type can be changed:
    • In Windows, click on ‘Devices and Printers’ and then double-click on 3700 series’

Then double-click on ‘Preferences’ and select the ‘Paper / Quality’

  • Select ‘Plain Paper’ in the drop-down ‘Paper type’ menu
  • Click on ‘Ok’ and close all windows
  • At this stage, slow printing should be resolved, if not continue to the next step to re-install the printer driver

For re-installation of the printer driver:

  • Download the latest version of the driver from the relevant and genuine HP website
  • The download will automatically provide you with instructions on the installation of the software
  • If the issue still does not get resolve, it is best to service the 123.hp.com/setup 3755 printer for Hp deskjet 3755 setup.
HP envy 5055 setup

Hp printer drivers download and install complete solution

Without the Hp printer drivers download, there won’t be any communication between the printer and your computer. 

It acts as an intermediary between the printer’s hardware and the printing management of the computer to give them excellent communication.

Thus, before connecting a new Hp printer, it is necessary to install the corresponding drivers.

If you are looking for a guide with proper steps to download hp printer drivers, then look no further. We have compiled this guide with all the steps required to download and install the Hp printer drivers.

Hp printer drivers download for windows

To download the drivers from the official website of hp you will need the printer’s name and model number. This will help the hp website recognize your printer and display the list of drivers specific to your printer model.

The information about the printer’s name and model is printed on the backside of the printer.

  • Now open the official website of Hp in your web browser.
  • Go to support and drivers page and from there, navigate to the Drivers and software page.
  • Now from the product category list choose printer.
  • At this time you will have to provide information about your printer.
  • Enter your product name in the, identify your printer search box and click on the submit button.
  • Now you have to select your operating system.
  • Hp website will search and list the available latest drivers for your printer.
  • Just click on the download button and your Hp printer driver download process will begin.

How to Install the Hp printer drivers

  • When the driver file is downloaded, you have to install it on your computer.
  • Locate the driver file you have downloaded. It will be an exe file.
  • Run the installation file and click on the install button.
  • When the installation is complete, restart the computer.

Update your hp printer drivers

Keep your Hp printer drivers to the latest released version. To update the drivers from the device manager follow the steps:

  • Go to start menu, find and open the run dialog box. There is also a short cut to do this. The run dialog box will instantly open if you press the Windows key and R key on the keyboard at the same time.
  • In the search field of the Run dialog box, type devmgmt.msc and then hit enter.
  • This will open the device manager window.
  • Find your printer’s name from the list of available devices and right-click it.
  • In the drop-down menu, you will find the option, update the drivers, click on it.
  • When prompted for how do you want to search the drivers, select Search automatically for updated driver software option.
  • Now, wait, windows will complete the Hp printer drivers update process.

That’s it! printer drivers are now correctly installed and updated to the latest version.

If you have faced any setbacks, we recommend that you go through all the steps one more time and see where the problem happened and rectify it.

If you still couldn’t figure out, why you are unable to complete the installation or you can’t follow the steps provided here, then you should contact the Hp customer support 1-877-364-5922 for more help.

123 HPsetup | HP printer setup & Installation

We are providing excellent   service for all kinds of printers. These printers are very useful for your office use as well as for your  personal use. Select your own printer based on your requirements. We have excellent and  experienced technical team Our team is very friendly and reliable   for any technical issue related with printers.123hp.com for basic customers services .

HP printers  are used for multiple purposes and easy to setup with both windows and Mac.If You have issue to setup and Installation with HP printers, Our team has the capacity to resolve the  challenging troubleshooting and technical issues. We are trying to improve in creating technology and try to provide the best service to everyone, everywhere. Our goal is to provide the best technical assistance with your 123 HPSetup or related all HP Products and services.  Our team goal is to provide one of the best  customer support. We are easy and very fast in our service.We promise to  deliver the best of the solution and support to your small and big technical issues when you required . You can reach us on  chat and with our technical support TOLL FREE NUMBER 1-877-364-5922.

 How to setup Windows ( 123 hpsetup )

 Before Installing  your printer make sure and download the 123hp software on your computer.Before you download your software on your computer , make sure it setup and power is on.

  •  If you connect your printer to computer with usb cable, please disconnect until it prompts to insulation.
  • On your computer open your an appropriate web browser and go 123.hp.com/setup.
  • Select download now and save on your computer .Open the saved file and select continue/select/run for downloading 
  • Now you can connect you USB cable to the printer from the computer.

On the agreement screen please select the licence agreement and then select “agree to the term”then select continue. Now you will see on your computer screen,  start showing your printer on your computer.

 How to setup on Mac

To connect Your HP printer with Mac Your can follow these steps :

  • Install your hp printer to Macos using a USB cable 
  • Download the software from Hp guidance.
  • Before you download your software ,make sure your printeri is set up and power on with your usb cable.
  • Now open your web browser and navigate to 123.hp.com/setup
  • Click download to save hp easy start to your Mac and then open your file.
  • When you see any security promed then click open and review the term and condition.
  • Now click agree,then click continue.
  • Select your printer from the detected devices on your Mac screen
  • Make sure your printer power is on also check the cable connection .
  • If your printer is still not detected then go to support.hp.com/drivers
  • And now you can download the latest drive for your printer.
  • If your printer supported then click continue.
  • Now you can follow the instructions on your computer screen given by support.hp.com/drivers. 
  • Please select your wireless network then click install.
  • Now you enter your wireless network password, then click ok to connect.

These are all the steps to connect your hp printer with Mac.Follow these steps to connect your printer with Mac . If You are still facing issue with 1-877-364-5922 for any Hp printer related problem.

How to set up Airprint setup

  • First you make sure your hp printer power is on.
  • Then on your  printer there is a small screen , touch the setup icon
  • Touch the network setup menu , you can down arrow and select network setup then touch wireless menu.
  • Now you select wireless direct setting
  • Touch wireless direct on off, you can touch on to enable wireless direct.
  • Now you can select your wireless direct name.
  • Press wireless direct mode and press “ print only”
  • THE PRINT ONLY ALLOW TO MOBILE USER access  printing functions.
  • Next you need you apple ipad or iphone for using Air print.
  • Touch the setting icon ,once your setting window open then go to wifi option
  • Your wireless settings menu option open now.
  • Make sure wifi button is switched  to on to enable wireless 
  • Select the hp wireless printer from the list using the printer name you previously found on your printer control panel.
  • Next you need to go to application to print your desire photos or any document

These are all the steps to connect your printer with windows and mac. If You still facing issue related 123 hpsetup call our toll free number 1-877-364-5922 for any printer setup and installation related issues.

123 hp com dj3630 install

How to setup your 123 hp com dj3630 install | Complete guide

Remove your HP dj3630 PRINTER from its box

Take out the HP Desk jet PRINTER(123 hp com dj3630 install) from its box, and then take off all the tape, stickers, and packing supplies from the HP printer.

  • Take the printer out from its box
  • Take off all the tape and packaging around the printer, and then open the outer printer door
  • Take off the tape and packaging found under the ink cartridge access door
  • Once you open the ink cartridge access door, take off the tape and cardboard box found inside the printer but DO NOT discard the cardboard box
  • Take the cardboard box and open it and remove all the contents which should include: the ink cartridges, the power cord and the USB cable
    • Contents inside may vary depending on country/region
  • Take the provided power cord and connect it to the back end of your HP dj3630 PRINTER and then plug the other end of the cord to a power outlet
  • Turn on your HP dj3630 PRINTER by pressing the POWER button

Install the ink cartridges provided in your HP dj3630 PRINTER

Install the HP dj3630 PRINTER ink cartridges which should be provided in the box with your printer

  • Once you open the ink cartridge access door, your HP PRINTER will complete the startup process which will move the carriage top the middle of the printer
    • Before you continue, wait for the printer to become idle and silent
  • Now you may carefully remove one of the ink cartridges from its package and touch ONLY the black plastic on the cartridge
  • Pull off the orange tab to take off the protective tape from the cartridge
  • Slide the ink cartridge holding it at a small upward angle into the empty corresponding slot, and then carefully push up against the ink cartridge until you hear it snap into place
    • The tri-color ink cartridge should be inserted into the left slot
    • The black ink cartridge should be inserted into the right slot.
  • Repeat the same installation steps for the other ink cartridges
  • Shut the ink cartridge access door
  • Shut the exterior door to you HP Printer

Insert standard printer paper into the corresponding input tray

Load standard printer paper in the input tray after the printer has been unpacked from its box.

  • Lift the input tray
  • Slide the paper width guide all the way to the left
  • Insert your standard printer paper into the input tray, and then carefullypushyour stack of printer paper down until it stops
  • Slide the paper width guide to the right so that it stops at the end of the printer paper
  • Take out the output tray, and then lift the tray extender

Install the right printer software/DRIVER for your HP dj3630 PRINTER

Now that your HP dj3630 PRINTER hardware is all set up, you can install the printer’s software. You must install the proper driver for your HP PRINTER in order to ensure efficiency and smooth running. The compatible driver will depend on the type of operating system your computer uses.

In the meantime, do not connect your printer to a computer until the printer software instructs you to do so

Download the latest version of the printing software from the following HP websites:

Follow the easy setup instructions for driver installation by answering the system prompts and then make sure to click the finish button once the setup completes. The HP printer assistant will install automatically for printing and scanning.

If you are still facing problem while installing driver of your 123 hp com dj3630 install, please call our toll-free number at 1-877-364-5922 for any HP Printer related issues and help.

123 HP com oj4650 | HP office jet 4650 setup & Installation

How to Setup HP officejet 3830

configure your 123.hp.com/setup 3830 (setup HP officejet 3830) printer when it is connected to the laptop or the computer is very simple. Some ink printers or laser printers have drivers or drivers. If you follow the right steps your new Hp 3830 printer will be up and running in no time. It would be very simple task when you know how to configure your 123.hp.com/setup 3830 printer. What all you need to do is to follow the right steps on the right time and in no time it would be easily connect.

Primary USB setup HP Officejet 3830

  • Turn on the computer and the printer.
  • Use the appropriate cable to connect the printer to the computer.
  • If you want to connect the printer by USB cable then properly connect both the ends of the printer USB cable one at the computer USB port and other on the printer USB port.
  • After doing all this your computer may going to ask for the printer driver installation so you need to follow the on-screen instruction to install them.
  • You can download the 123.hp.com/setup 3830(setup HP officejet 3830) printer driver either from 123.hp.com website or if you have the driver disk which you get with the hp printer.
  • You need to be active at the time of downloading the right hp drivers from the website 123.hp.com.
  • Once the driver download successfully then you need to install it properly by running the printer driver file and then need to follow the on-screen instructions one-by-one.
  • Once the installation is complete, the program will ask you to print a test page to verify that it is really well configured and that the printer works properly.
  • Besides, it will allow you, through the “printer configuration” option, to make the changes you want in it, if you consider it necessary.

Adding the hp 3830 Printer manually to the windows computer

If after connecting the printer and the computer through the cable the printer has not been configured and added directly, you will have to do it manually.

  • To do this you will have to access the Control Panel and click on Printers or Devices and Printers.
  • Once inside the menu click on Add a Printer.
  • Choose your printer and follow the steps.
  • Then press on the add button.

123 setup hp Officejet 3830 setup for wireless connection

WLAN-capable printers offer the user a location-independent printing experience. To make this possible, the printer and end device must be integrated into the same network. Depending on the HP model, the user can set up the wireless printer without a cable. The following instructions will help you to install the HP 3830 printer on the network.

Before you attempt to set up your wireless hp printer, make a note of the network name and the associated security password in advance, you may need it.

  • Turn on the HP printer and make sure that the router is also active
  • Open the Network settings in the printer’s control panel menu or touch the Wi-Fi symbol directly
  • Make sure that the printer and router must each be positioned in the proximity of the signal’s range.
  • Open the Wireless Setup Assistant and select the appropriate one from the list of networks displayed
  • If your network name is not displayed, you can enter the network name manually in the lower part of the list.
  • You may be prompted to enter the appropriate security password.
  • The printer will now be connecting to the network.
  • All devices dialed into the same network can now use the printer

Setup Hp Officejet  3830 printer for MAC devices

Simply connect your Apple device to the wireless hp officejet 3830 printer and print wirelessly easily and effectively. The annoying pull on cables and the loud noise during the printing process have been done with the setup of a WLAN printer. If the printer has been set up correctly, it will automatically connect to the corresponding network.

WiFi setup HP officejet 3830 for connecting the printer to iPhone

The file is on the iPad or iPhone and should be printed out. But how can I connect the iPad or iPhone to the printer? This requires a wireless printer and a network to which the printer and the corresponding Apple device have access.

  • Connect the hp printer and iPad or iPhone to the same network so that printing is possible without problems.
  • You can do so by enabling the wireless setting on your iPhone and then connecting your printer to your phone’s WIFI network.
  • Open the file to be printed (image, file, text, etc.)
  • Select the share icon.
  • Find the Print option and select it
  • Choose the option ‘Select Printer’
  • Now all available Air Print printers are displayed.
  • Select the appropriate printer and tap Print

Setting up a printer on a Mac network is also simple. If you have a Mac Book and you want to configure your printer on this, you will see following this step by step is really simple and fast.

  • Click on the Apple menu first and in it on System Preferences.
  • Click on the Print and scan option.
  • Click and hold the “+” button at the end of the list of printers and select the printer you are interested in adding from the menu shown on your screen.
  • In case that the printer you want is not displayed, do not worry; Simply click on the IP box at the top of the Add Printer window and enter the IP address of the printer in the Address field.
  • Click on Download and install, if requested by the computer. It is very likely that your computer already has the necessary program to configure the printer. If not, it will be allowed to download the drivers or drivers easily from the Apple website.
  • Perform a print test to verify that everything is correct.

Connect the 123 hp 3830 printers to Android device

For the Setup HP officejet 3830 with your android device you need to follow these steps:

  • Download and install a hp print service plugin from the Google play store and enable it.
  • Enable the WIFI network of your android device.
  • Connect the printer to the phone’s WIFI network.
  • Open the file to be printed (image, file, text, etc.)
  • Select the share icon and then tap the Print option
  • Choose Select Printer from the menu.
  • From the available printers are displayed choose the appropriate printer and tap Print.
Driver for HP Envy 5540 | HP Envy printer software download

Driver for HP Envy 5540 | HP Envy printer software download

For setting up the computer network connections and using all the features of your printer Drivers for HP Envy 5540 all-in-one printer should be properly installed in your computer system. On regular interval of times one can get update in the driver version, so once it updated the Hp envy 5540 driver firmware the bug get removed and the performance get increased.

Drivers for HP Envy 5540
  • From website like 123.hp.com you can easily find the drivers for your HP printers and at same place you will get the driver updates and firmware updates too through which you download the driver and also install them on your Windows or Mac Operating System.
  • HP driver and software downloads are the place on 123.hp.com where you will find which the full feature basic drivers for your HP Printers with some additional printing software.
  • HP support assistant always notifies you whenever the printer software or firmware update is available or not, but this is feature is only for Windows 7
  • Apple software update: You need to download the software once on the Mac device and when you need to check need to run the HP Printer driver software again and it will check the update for the Mac device.

How to download printer driver for HP Envy 5540

You should have the knowledge and adequate skills of computer to download, install and update your HP printer driver manually. Finding the right HP printer driver from the internet is very important so you have to be very active and careful in finding them correctly. You can very easily find the right printer driver from the website 123.hp.com where you also get the regular updates of all HP products. You need to go on 123.hp.com and search your HP Envy 5540 printer model in the search box and you will get the right printer model drivers. Now you need to just open the HP Envy 5540 printer driver exe file  from the downloaded folder on the computer system and follow the on-screen instructions for the driver installation of the printer driver.

Follow all the steps given below to install the HP Envy 5540 drivers

  • Visit 123.hp.com search for the printer model in the search box and therefore, download the HP Envy 5540 printer software driver on the computer device.
  • After downloading the HP Envy 5540 printer software driver you need to click on Open/Run/Save whatever it Display on the computer on-screen dialogue box.
  • Now follow all the given on-screen instructions on-by-onto process the setup for installing HP Envy 5540 printer driver on the computer system.
  • One can turn off the enable wireless connectivity for certain printers.
  • When you purchased the new HP printer you will get a software CD with the printer which contains the additional HP printer software drivers.

How to install printer driver for HP Envy 5540

By visiting HP official website you can easily get the HP Envy 5540 printer driver for free. You need to search then select the appropriate HP printer driver only the one which is compatible for your current windows operating system. There you will find a complete list of operating systems for your HP Envy 5540 printer from there you need to mark the windows version which you using and then start the downloading of your driver and once it will be downloaded complete then you need to run that and follow the on-screen steps and install the HP Envy 5540 printer software driver.

HP Envy 5540 Printer

The HP Envy 5540 all in one printer is a bit different from other printer as it preserves around 50% of your ink level with HP Instant Ink cartridges. You can connect the HP Envy 5540 printer with your tablets or mobile devices and therefore you can print the lab-quality pictures wirelessly in a go. HP Envy 5540 can print the best quality of web pages with HP high yield ink cartridges on a wireless connection.

123.hp.com/setup 5055 | HP Envy 5055 Setup guide

123.hp.com/setup 5055 | HP Envy 5055 Setup guide

Setting up the 123.hp.com/setup 5055 all in one printer is easy and requires a few simple steps.

Hp as always brings it’s hallmark quality and features with the new hp envy 5055 Printer. It’s sophisticated features, beautiful design and robust functioning make it one of the best Printer to buy.

Hp envy 5055 setup for the WIFI connection( 123.hp.com/setup 5055 )

This is a bit complicated but at the same time the most reliable method to connect the 123 hp envy 5055 printer. You do need the network name and password.

  • Turn on the printer and go to the control panel. Before you do this, you should also know both the name (also called SSID) of your network and the associated password. If you do not know this data.
  • Now press the “Setup” button on the printer control panel and then go to “Network”.
  • At this point, the printer should show you all network sources in the vicinity. Choose the name of your network or, if you cannot find it, enter it manually at the end of the list. Make sure that the letters are case sensitive, otherwise, the connection cannot be established.
  • After you have selected your network, you will be asked to enter the password. Again, think of an exact spelling. Once this step is complete, the printer should automatically connect to the network, including your laptop. You can now print without being connected to the printer with a USB cable.

123.hp.com/setup 5055 Printer via HP wireless connection

With the so-called HP wireless connection, you can skip the steps when entering the network name and password. To do this, however, both the printer and the laptop must be compatible with this technology. The following conditions must be met for the HP wireless connection:

  • At least Windows 7 or macOS X 10.5 is installed on your laptop.
  • The connection between the laptop and the network is wireless.
  • Make sure that the printer is in the “HP Auto Wireless Connection” status. This is automatically the case when you turn on the printer for the first time or try to connect to the network.
  • If you see the automatic wireless connection after turning on the printer, consider using this option. Before following the steps below, however, you should make sure that no downloads are in progress or that you are doing other important work on the Internet. The connection to the Internet is disconnected once during setup, which prevents access to the Internet during this time.
  • Install the hp envy 5055 Printer software on your laptop that came with your printer. Simply follow the instructions that are displayed during the installation.
  • At some point, you will be asked to choose a connection type for the network setup. Select “Network (Ethernet / Wireless)” and then the option to automatically send your wireless settings to the HP printer.
  • You don’t need to do more at this point, as the rest is done by HP software. Settings regarding the network name and password are omitted.

Setup via WPS setup

WPS (Wi-Fi Protected Setup) is used to connect network-compatible devices with one simple push of a button. In order to be able to use this method, however, some basic conditions must be met once again:

  • Both your HP printer and the wireless router must support WPS. You will usually find out whether this is the case in the manual. Alternatively, a large button labeled WPS is a safe indicator.
  • The router must use WPA or – better – WPA2 as the encryption method for the password. This is the case with the vast majority of routers. Older devices that only use WEP encryption or a similar method are not compatible with the WPS setup.

The setup via WPS setup is then very simple just follow the steps;

  • First press the WPS button on your 123 HP envy 50555( 123.hp.com/setup 5055) printer. The easiest way to find out whether there are other small things to consider is in the manual.
  • Within the next few minutes – and preferably as soon as possible – press the WPS button on your router. If in doubt, hold it down for a few seconds if the connection doesn’t work.
  • Normally, the connection between the printer and the laptop (or more precisely the network) should now be established automatically.

123.hp.com/5055 setup for printing from mobile

Quick and hassle-free printing is the demand of most of the users around the world and mobile printing is what gives them just the right tool to do so.

Hp understanding this need does not lag behind and offer comprehensive tools and features to connect the hp printers to the mobile device. Be it Android platform or the iOS, connecting the hp printer to these devices is very easy.

Hp envy 5055 setup for iPhone through apple’s AirPrint

Apple’s AirPrint is a utility suite that is inbuilt in the MAC as well as iOS devices. Airprint facilitates connecting the printer as well as printing without the need for downloading and installing any extra application.

All the latest hp printer supports the apple’s AirPrint and with your 123 hp envy 5055( 123.hp.com/setup 5055) print you don’t need to worry about the AirPrint compatibility issues.

  • Turn on the WIFI of your iPhone.
  • Press the wireless button on your printer. You can also do so via the control panel of the printer.
  • Your printer will search and find the wireless network of your iPhone and then connect to it.
  • Make sure that your printer and the iPhone is connected to the same wireless network.
  • Now select the document or photo you want to print.
  • Click on the share button, now select the print option.
  • You will be asked to select the printer, if your hp envy 5055 is setup and connected correctly, you will see it listed.
  • Select your printer and then print the photos or documents.

Hp envy 5055 setup for android device

  • Connect the hp printer on your android phone’s WIFI network.
  • Go to google play store and download the Hp print service plugin
  • Go to settings and enable the plugin.
  • Now just select the document and choose the print option from the drop-down menu.
  • Select your printer and start printing.

Hp envy 5055 setup for ePrint

Hp ePrint is the cloud-based service offered by Hp which gives you the freedom to print from anywhere as long as you have access to the internet.

  • Locate the hp ePrint button on the printer.
  • Ensure that your computer and the printer have access to the internet.
  • Enable web services from the control panel of the printer.
  • Now you just need the email address of the printer.
  • You just have to send the document or photos over the mail for printing.
  • Just make sure that the documents and photos do not exceed the 10 MB size.

Whenever you send the email, it should have a proper subject, or the print job may be canceled by the ePrint server.

If You are still facing issue with your HP printer You can also call our toll free number +1-833-283-0002.

HP Wireless Printer Setup

HP Wireless Printer Setup guide(Connect hp printer to wifi)

HP wireless printer setup is very difficult process .Connecting your Hp printer through a Wireless network frees you from the constraint of wired printing. Your printer can be connected to your laptop or computer from anywhere until you are in the range of your wireless network and get your printing job done.

There are four ways through which you can set up your Hp Wireless printer;

  1. Hp Auto Wireless Connect.
  2. WPS or WIFI Protected Setup.
  3. Hp Wireless Printer Setup Wizard ( connect hp printer to wifi ).
  4. USB method for Wireless connection. ( For printer models without display )

Whichever method you opt for will depend on your preference as well as on your printer’s model.

HP auto Wireless connect

Only the latest models of hp Printers have this feature. So to connect your printer through this method, not only should your printer be of the newest model but your computer should also meet specific criteria.

  • Your computer must have Windows 7/8/10 version installed on it.
  • Your computer should connect wirelessly to your network and is able to control the Wireless adapter. This is to ensure that hp software can access network settings.
  • Your computer should use a dynamic IP address and not the static IP address.
  • If your computer and your Hp printer both meet the criteria then proceed;
  • First, you have to install the Hp printer software.
  • You can use the installation disk that comes with the printer, or you can download the software online and then install it.
  • Power on your Hp printer. You have a two hours window in which your printer will be in auto-connect mode.
  • So you have to complete the task within the specified time.
  • Run the software and follow the on-screen instruction.
  • When you are asked to choose the connection type, select ‘wireless.’
  • Select YES when the setup asks to send network settings to the printer.
  • Wait for some time as the Wireless connection is being established between your printer and computer.
  • Close the software and start printing.

WIFI Protected Setup (WPS)

There are two modes that enable you to connect your printer through the WPS method. You can opt for WPS Push button mode or WPS Pin.

Push-button mode is the easier of the two and the recommended one.

  • First, ensure that your router has the physical WPS Push-button.
  • Your printer has the WPS Push button mode feature.
  • Start the push button mode on your printer.
  • There will be a button on your printer, or you can refer to the instruction manual of your printer.
  • Power on WPS by pressing the WPS button on your router, you may have to keep pressing it for a few seconds to enable the WPS feature.
  • Your printer will connect to your router’s network.

Hp Wireless Printer setup wizard

You can connect your Hp wireless printer through this method only if you have the printer with display as you have to access the control panel of the printer.

  • First, ensure that you have the network name and the security password.
  • Go to network menu through your control panel or you can press the Wireless icon if you have it on the control panel.
  • From there, go to the settings and select the Wireless setup wizard.
  • The Wireless setup wizard screen will show the name of all the available network.
  • Select the name of your network.
  • In case your network’s name is not mentioned, you have to enter the name manually.
  • You have to enter the exact name of your network.
  • When you have selected the network, you will be prompted to enter the WEP key or password.
  • After entering the key, press ok, and your printer will connect to your network.

USB wireless connection

This method is for those who do not have a display on their Hp printer.

They can connect it via USB Wireless setup method. You only need a USB cable and that only for two to three minutes.

  • Power on your printer.
  • Insert the USB cable in the USB port of the printer and the computer.
  • You also have to install your printer’s software.
  • Install is through the installation disk or download it from the official Hp website.
  • After the installation, run the software and follow the on-screen instruction.
  • When your printer is connected to your network, remove the USB cable.

These are four methods to connect your Hp Wireless Printer. Choose the one which suits you and your printer supports it.