HP Officejet Pro 8610

HP Envy 5055 setup|123 hp envy setup & installation

HP envy 5055 setup is very simple. You can follow these steps for setup and install HP Envy 5055 printer with your system.

Take your HP Envy 5055 Printer out from its box

  • Take out the printer from its box and remove all tape and packaging materials from around the printer
  • Take off the sticker from the control panel
  • Carefully grab the printer’s handles from its side and then lift the ink cartridge access door until it locks into its place
  • Take off any excess tape and packaging material from inside the printer
  • Shut the ink cartridge access door
  • Pull open the input tray towards you to extend the tray, then take off any packaging material
  • Push the input tray forward until it locks into its place in order to close the input tray door

Plug in your HP Envy 5055 Printer Power Cord and set preferences(HP Envy 5055 setup)

  • Plug one end of the power cord into the back-end of the printer, and the other into an electrical outlet
  • Turn the printer on
  • Set your preferences under the control panel and touch your preferred language and country/region; select YES to confirm your choice
  • Set the date and time and then select YES to confirm choice if prompted to do so
  • A welcome screen will be displayed on the printer’s control panel

Install your HP Envy 5055 Printer Ink Cartridges

  • Use the ink cartridges provided in the box with your printer
  • Life open the ink cartridge access door and let it lock into place
  • The carriage will move a little to the left; wait until the carriage stops moving and the printer becomes idle before you continue
  • Take out one of the ink cartridges from its packet. Make sure to only touch the black plastic on the ink cartridge
  • Take off the plastic tape from the ink cartridge
  • Raise the lid of the ink cartridge slot
  • With the ink cartridge nozzles facing the printer, place it into its slot until it locks into its place
  • Shut the lid of the ink cartridge slot to secure it into place
  • Follow the previous steps to install any other ink cartridges
  • Shut the ink cartridge access door

Place standard printer paper into the Input Tray

  • To open the input tray, pull it towards yourself to extend the tray
  • Gently slide out the paper width guides as far out as possible
  • Load standard printer paper with the print side facing down
  • Carefully push the stack pf printer paper until it can go no further
  • Gently slide the paper width guides along the printer paper until it touches the edges; make sure they do not hold the printer paper too tightly
  • Slide the input tray back into the printer, and then select DONE on the printer’s control panel
  • Pull the output tray out and raise the output tray extender
  • The printer should print out an alignment page once done

Align the Ink Cartridges

  • This is a necessary step in order to ensure the best print quality. Use the alignment page from the previous step
  • Raise the scanner lid
  • Put the alignment page with the print side facing down on the scanner glass
  • Position the page along the guides provided around the glass
  • Shut the scanner lid close and then select OK on the printer’s control panel
  • The printer will now align the ink cartridges
  • Once the alignment is complete, select OK on the control panel once again
  • Your hardware is all set up!

Install the corresponding software/driver for your HP Envy 5055 Printer

Now that your HP Envy 5055 PRINTER hardware is all set up, you can install the printer’s software. You must install the proper driver for your HP PRINTER in order to ensure efficiency and smooth running. The compatible driver will depend on the type of operating system your computer uses.

In the meantime, do not connect your printer to a computer until the printer software instructs you to do so!

Download the latest version of the printing software from the following HP websites:

Follow the easy setup instructions for driver installation by answering the system prompts and then make sure to click the finish button once the setup completes. The HP printer assistant will install automatically for printing and scanning.

If you are still facing problem while installing driver for hp envy 5055 PRINTER, please call our toll-free number at 1-877-364-5922 for any HP Printer related issues and help. 123hp.com