123.hp.com/setup 4650 | HP printer setup & Installation

Remove the newly bought hp printer from the box and prepare for the 123.hp.com/ setup 4650. Connect the power cord to the power supply and switch on the printer 123 hp setup for hp 4650.

Primary 123 hp setup for hp 4650 office Jet printer( 123.hp.com/setup 4650 )

  • When the printer switches on for the first time it may make some noise, it’s normal, don’t worry.
  • On the control panel select the language and the region.
  • You will be prompted to insert the ink cartridge
  • Open the cartridges box, place the ink cartridges in the corresponding space, you can refer the instruction manual.
  • Put papers in the paper tray and let the printer print the alignment page.
  • Once the basic setup is complete install the drivers and software from the CD that comes with the printer.
  • If you don’t have the CD download the required drivers from the 123.hp.com/setup 4650 page.

123 hp 4650 Officejet setup for wireless connection

WLAN-capable printers offer the user a location-independent printing experience. To make this possible, the printer and end device must be integrated into the same network. Depending on the HP model, the user can set up the wireless printer without a cable. The following instructions will help you to install the HP 4650 printer on the network.

Before you attempt to set up your wireless hp printer, make a note of the network name and the associated security password in advance, you may need it.

  • Turn on the HP printer and make sure that the router is also active
  • Open the Network settings in the printer’s control panel menu or touch the WiFi symbol directly
  • Make sure that the printer and router must each be positioned in the proximity of the signal’s range.
  • Open the Wireless Setup Assistant and select the appropriate one from the list of networks displayed
  • If your network name is not displayed, you can enter the network name manually in the lower part of the list.
  • You may be prompted to enter the appropriate security password.
  • The printer will now be connecting to the network.
  • All devices dialed into the same network can now use the printer

An alternate method for the wireless setup of 123 hp 4650 Officejet printer

In most cases, a computer is needed to connect an HP printer without a screen to a network.

  • Connect the computer and printer via the USB cable by inserting the cable in the USB port.
  • Install the printer properly with the latest driver
  •  The latest drivers can be downloaded from the 123.hp.com/4650 for the 4650 Printer.
  • Follow the installation wizard to the point Connection type. Selet the connection type wireless.
  • After installing the WLAN printer, it should always automatically dial into the corresponding network
  • The WLAN printer can be used by all end devices in the same network

Add the 123 hp 4650 WLAN printer Windows 7/8

Use the following instructions to add the hp 4650 WLAN printer under the Windows 7 and 8 operating systems. Follow all steps of the installation to set up the WLAN printer again.

  • First, call on the Start button the go-to Add Devices and Printers and then to Printers.
  • Select a network, wireless or Bluetooth printer from the list of available devices.
  • Select the correct printer from the list of available printers
  • If prompted, install the latest driver for the printer.
  • If the printer has been integrated into the network, all end devices dialed into the network can print with it

123 hp setup for adding the wireless hp Officejet 4650 printer on Windows 10

If you want to integrate the hp printer wirelessly under the Windows 10 operating system, the following instructions make installing and setting up the printer easy.

  • Before installation, make sure that both the printer and the router are on and the WLAN is activated.
  • Open Control Panel then navigate to Hardware and Sound and then to Devices and Printers
  • Find and select Add Printer and then from the next menu choose Add Bluetooth, Wireless, or Network Printer.
  • Select your printer from the list
  • Follow the installation instructions
  • After the installation was completed, the printer was activated as a WLAN printer and can now be used

123 hp setup for connecting the hp 4650 printer to Apple devices

Simply connect your Apple device to the wireless hp printer and print wirelessly easily and effectively. The annoying pull on cables and the loud noise during the printing process have been done with the setup of a WLAN printer. If the printer has been set up correctly, it will automatically connect to the corresponding network.

WiFi setup for connecting the printer to iPhone

The file is on the iPad or iPhone and should be printed out. But how can I connect the iPad or iPhone to the printer( 123.hp.com/setup 4650 )? This requires a wireless printer and a network to which the printer and the corresponding Apple device have access.

  • Connect the hp printer and iPad or iPhone to the same network so that printing is possible without problems.
  • You can do so by enabling the wireless setting on your iPhone and then connecting your printer to your phone’s WIFI network.
  • Open the file to be printed (image, file, text, etc.)
  • Select the share icon.
  • Find the Print option and select it
  • Choose the option ‘Select Printer’
  • Now all available AirPrint printers are displayed.
  • Select the appropriate printer and tap Print

WiFi setup for hp 4650 Officejet printer on Apple MAC

Printing files or photos from the Apple Mac is possible wirelessly using the hp 4650 wireless printer( 123.hp.com/setup 4650 ). Follow the instructions below to set up the wireless printer.

  • First, make sure that WiFi is accessible through the router and the printer has access to the wireless network.
  • Open the system settings on your PC
  • Select Printers & Scanners and then click on the + (plus) sign on the window
  • Select from the list of available devices the appropriate printer which you want to add.
  • As soon as the printer is added, check the box Share this printer on the network.

 Connect the 123 hp 4650 printers to Android device

  • Download and install a hp print service plugin from the Google play store and enable it.
  • Enable the WIFI network of your android device.
  • Connect the printer to the phone’s WIFI network.
  • Open the file to be printed (image, file, text, etc.)
  • Select the share icon and then tap the Print option
  • Choose Select Printer from the menu.
  • From the available printers are displayed choose the appropriate printer and tap Print.

If You are still facing problem realted 123.hp.com/setup 4650 . You can also call our toll free number 1-877-364-5922.

123 hp com ojpro8710

123. Hp.comoffice jet pro 8710 | HP printer installation

First of all we need to unboxed the 123 hp com ojpro8710 printer from the box and start doing the preparation for setting it up. You need to connect all the cords to a place and then connect them to the desired places on the printer. Therefore, you need to connect the printer with the power supply and switch it ON.

It would be very simple task when you know how to configure your ojpro8710 printer. What all you need to do is to follow the right steps on the right time and in no time it would be easily connect.

Primary USB setup for the 123 HP 8710

  • Turn on the computer and the printer.
  • When both the devices turn on completely then use the appropriate cable and connect the printer to the computer properly.
  • If you want to connect the printer by USB cable then properly connect both the ends of the printer USB cable one at the computer USB port and other on the printer USB port.
  • After doing all this your computer may going to ask for the printer driver installation so you need to follow the on-screen instruction to install them.
  • You can download the ojpro8710 printer driver either from 123.hp.com website or if you have the driver disk which you get with the printer.
  • You need to be active at the time of downloading the right 123.hp.com/ojpro8710 drivers from the website 123.hp.com.
  • Once the driver download successfully then you need to install it properly by running the 123.hp.com/ojpro8710 printer driver file and then need to follow the on-screen instructions one-by-one.
  • Once the installation of 123.hp.com/ojpro8710 gets completed, then the program going ask to print a test page for verifying that it is installed and configured properly or not and that will also proves that the 123.hp.com/ojpro8710 printer is setup and working properly.

Hp office jet pro 8710 for the WIFI connection

The Wireless connection process is a bit complex process but it is more reliable setup of123.hp.com/ojpro8710 printer. This is a cable-less setup of the printer with the computer which will connect the printer to the wireless network and then the printer will come on network and then it can be directly connect with any device on that wireless network.

Before starting your /ojpro8710 printer wireless process, somewhere make a note of your network name and the associated password of that network in advance, as you are going to need that in the connection process.

  • Make sure that your router and computer on which you want to configure your 123.hp.com/ojpro8710 printer is ON and working properly.
  • Make sure that the router is the signal range of your computer and the printer.
  • Go to the printer touch screen and open the menu option, from there try to find the Network Setup options and open that using the touch.
  • In Network Setup try to find Wireless Setup and in that go to Wireless Setup wizard.
  • In Wireless Setup Wizard tap on network search and try to find your home network (also called SSID)
  • In case if your home wireless network name is not displayed in the list, then you need to enter your network name manually.
  • If it displayed your wireless network name (also called SSID), then select it and it then and there prompted to enter the network password.
  • Once this step is get successfully complete, your printer get automatically connect to the wireless network of your Wi-Fi, including with the computer system.
  • Now you can print directly and very easily without the USB cable.
  • All the devices on that particular network can now easily get connect with your 123 hp com ojpro8710 wirelessly.
Driver for HP Envy 5540 | HP Envy printer software download

Driver for HP Envy 5540 | HP Envy printer software download

For setting up the computer network connections and using all the features of your printer Drivers for HP Envy 5540 all-in-one printer should be properly installed in your computer system. On regular interval of times one can get update in the driver version, so once it updated the Hp envy 5540 driver firmware the bug get removed and the performance get increased.

Drivers for HP Envy 5540
  • From website like 123.hp.com you can easily find the drivers for your HP printers and at same place you will get the driver updates and firmware updates too through which you download the driver and also install them on your Windows or Mac Operating System.
  • HP driver and software downloads are the place on 123.hp.com where you will find which the full feature basic drivers for your HP Printers with some additional printing software.
  • HP support assistant always notifies you whenever the printer software or firmware update is available or not, but this is feature is only for Windows 7
  • Apple software update: You need to download the software once on the Mac device and when you need to check need to run the HP Printer driver software again and it will check the update for the Mac device.

How to download printer driver for HP Envy 5540

You should have the knowledge and adequate skills of computer to download, install and update your HP printer driver manually. Finding the right HP printer driver from the internet is very important so you have to be very active and careful in finding them correctly. You can very easily find the right printer driver from the website 123.hp.com where you also get the regular updates of all HP products. You need to go on 123.hp.com and search your HP Envy 5540 printer model in the search box and you will get the right printer model drivers. Now you need to just open the HP Envy 5540 printer driver exe file  from the downloaded folder on the computer system and follow the on-screen instructions for the driver installation of the printer driver.

Follow all the steps given below to install the HP Envy 5540 drivers

  • Visit 123.hp.com search for the printer model in the search box and therefore, download the HP Envy 5540 printer software driver on the computer device.
  • After downloading the HP Envy 5540 printer software driver you need to click on Open/Run/Save whatever it Display on the computer on-screen dialogue box.
  • Now follow all the given on-screen instructions on-by-onto process the setup for installing HP Envy 5540 printer driver on the computer system.
  • One can turn off the enable wireless connectivity for certain printers.
  • When you purchased the new HP printer you will get a software CD with the printer which contains the additional HP printer software drivers.

How to install printer driver for HP Envy 5540

By visiting HP official website you can easily get the HP Envy 5540 printer driver for free. You need to search then select the appropriate HP printer driver only the one which is compatible for your current windows operating system. There you will find a complete list of operating systems for your HP Envy 5540 printer from there you need to mark the windows version which you using and then start the downloading of your driver and once it will be downloaded complete then you need to run that and follow the on-screen steps and install the HP Envy 5540 printer software driver.

HP Envy 5540 Printer

The HP Envy 5540 all in one printer is a bit different from other printer as it preserves around 50% of your ink level with HP Instant Ink cartridges. You can connect the HP Envy 5540 printer with your tablets or mobile devices and therefore you can print the lab-quality pictures wirelessly in a go. HP Envy 5540 can print the best quality of web pages with HP high yield ink cartridges on a wireless connection.



For 123 HP COM SETUP 6978 take the printer out of the box and set all the parts properly. Now, need to get all the cords and connect them on the respective places and the power cord to the wall socket properly for a strong connection. Once, all the cord connect properly we need to press the power ON button once to turn the printer ON.

How to do the complete setup of the printer( 123 HP COM SETUP 6978 )?

  • Printer should be properly connected to the wall socket then we need to turn on the power button on the printer.
  • In the beginning it might make some noise as it is setting up for the first time.
  • Once it turn On, the home screen we will get some option like choose the language and then we need to select the language on which we are comfortable and then we need to select the country and region.
  • After these steps it going to ask to insert the ink cartridges so we need to use the cutout button which are on the sides of the printer and lift the panel up.
  • After this we need to take the ink cartridges and remove the orange tape on them and slide the ink cartridges place and insert tri-color and black n white ink cartridges on by one on there respective places.
  • Therefore, we need to close the panel properly down and lock it down and after this need to hit OK in the Control Panel screen.
  • Once this process complete we need to pull the paper tray to the level and set it and then need to put the stack of papers properly on paper tray. Printer is now ready to print the alignment pages. Once the alignment printing done then we need to put them on the scanner glass and scanned them.
  • When that complete we will get “Alignment Successful” message on the control panel.
  • After this now user need to connect the printer to the computer with Ethernet or USB or Wireless connection.
  • Once all those basic steps get done, install the software of the printer with the help of the disk (printer driver CD) or from the website support.hp.com and need to follow the steps on them to complete the printer driver installation completely.
  • User can also download the printer drivers from the website link 123.hp.com/ojpro6978 or 123.hp.com/setup 6978.

123 HP COM SETUP 6978 | How to print from Mobile device?

For 123 HP COM SETUP 6978 on the iOS or Android device by using and of the built-in software any user can print photos, emails, documents or any online webpage or file.

  • User should be ensure about the wireless is turned ON and 123 HP Office jet Pro 6978 is properly mapped to the wireless network before starting and print job.
  • Both the devices, 123.hp.com/ojpro6978 printer and mobile device should be connected to the same wireless network.
  • User need to go to the App Store and download anyone compatible printing application for the mobile device.
  • If we want to printer from IPhone we need to be make sure that the printer should be Air Print enabled.
  • Once the app download successfully then we need to open that and we need to find the printer on the search list and need to select it.
  • After this we need to open the file, photo, documents, email or any web page which we want to print and then we need to select the share icon or need to touch on Menu and need to touch the Print option.
  • After this it will redirect us to the printer option and from there we need to select the printer which we want to use.
  • From the printing menu we can do the setting changes like we can specify the no. of copies and the format of printing.

If You are still facing issue with 123 HP COM SETUP 6978 You can also call our toll free number +1-833-283-0002 for any printer related  query

123.hp com/setup 8710 and troubleshooting guide

123.hp com/setup 8710 and troubleshooting guide

Primary 123.hp.com/ setup for hp 8710 printer

  • Take the printer out of its packaging
  • Connect the printer to an electrical outlet
  • Insert the ink cartridges or toners. (Please refer to the printer manual)
  • Choose the appropriate connection

Install the drivers for the printer

  • Insert the utility cd in the optical drive.
  • Wait for the setup to run and install.
  • If you don’t have the installation disk enter the 123.hp.com/8710 URL in your browser.
  • Specify your printer model.
  • Download the latest drivers and install them.

Connect the 123 hp 8710 printer through USB cable

Place the printer close to the computer as most USB cables are of short length.

  • Plug the printer USB cable into your computer. It should fit into one of the USB ports on the side of your computer or on the back or front of the CPU box.
  • Plug the other end of the USB cable to the printer.
  •  Press the button to turn on the printer. Be sure to wait a minute or more after doing this before continuing.
  • In many cases, simply turning on the printer after connecting to the computer will require the installation of the printer to begin. If so, follow the on-screen instructions until your printer is installed.
  • If plugging the printer into your computer does not prompt the installation process to start, continue with this method.
  • Look for the Windows logo in the lower-left corner of the screen and click on it. The Start menu opens.
  • Enter “printers and scanners” in START.
  • This will locate the printers and scanners section on your computer.
  • Click on printers and then scanners. You will see this at the top of the Start window.
  •  Here click on “Add a printer or scanner”. It’s at the top of the printers and scanners window.
  • Click on the name of your printer. You will find it in the  ” Add a printer or scanner” window. By doing so, you will bring the printer installation window.
  • If the name of your printer does not appear, you must click on “the printer I want is not listed”, then select a search option and follow the on-screen prompts.
  • Your printer is now correctly installed and ready to print.

Connect the 123 hp 8710 through WIFI

Connecting the printer wirelessly has its advantages. One of them is your printer is free from space constraint as long as it is in the range of the wireless network.

There are mainly two  ways to connect your printer:

  1. Automatic wireless connection
  2. WiFi Protected Setup (WPS)

Connect a printer via WiFi through WPS

  • Press the wireless button on your printer.
  • Now press on the WPS button on your router.
  • Your printer will search for the networks.
  • It will connect to your wireless network.
  • You may have to enter the network password.
  • When this is done open your computer’s settings or control panel
  • Choose “Devices and Printers”
  • Select “Add a printer”
  •  “Add a network, wireless or Bluetooth printer” is the option that you should choose from the window.
  • Select your wireless printer
  • Install the printer driver on your computer
  • Follow the steps of the installation wizard and click on “Finish”

123 hp 8710 setup to connect on Mac

  • At the top left side of the screen there will be the apple menu, click on it.
  • Click on “system preferences”
  • Select the “Printers and scanners” icon
  • Click on “Add (+)”
  • Choose your wireless printer from the list of nearby devices or click “Add a printer” if your model does not appear
  • If necessary, enter the IP address of your printer

Connect the hp wireless printer to an iPhone

  • Make sure your phone and printer are on the same wireless network.
  • Select the photo or document you want to print.
  • Click on the share or configuration icon to access the printing options of the application
  • Click on the “print” option.
  • Choose your printer supporting AirPrint functionality.
  • All the latest 123 hp printer supports the apple AirPrint feature. So you don’t have to install any third-party application.

Install the 123 hp 8710 printer in Windows 10 via an IP address

  • Enter printers ” in the search field of the start menu.
  • Select the Printers and scanners option from here.
  • Look for the ” Add a printer or scanner ” from the menu and select it.
  • Wait for the ” The printer I want is not in the ” Option list to appear, then select it.
  • You will see the option ” Add a printer using a TCP / IP address or hostname “, select it and then select ” Next “.
  •  Go for the ” TCP / IP Device ” option from the ” Device Type ” list.
  • Type the hostname or IP address of the printer and then select ” Next “.
  • Windows should find the printer if it is secure and configured correctly.

Troubleshooting for the wireless connection of the hp 8710 Printer

The printer cannot connect to the network

You have installed the printer over WIFI and the configuration seems to have gone smoothly, but you cannot control the device via the network? Then the configuration is probably wrong or incomplete. Therefore, data exchange between the Wi-Fi router and the printer is impossible. In this case, select the router settings and check the configuration. It is enough to have made a mistake or to have incorrectly selected the options for it is impossible to use a printer via Wi-Fi.

MAC filtering blocks unauthorized Wi-Fi devices

MAC filtering requires network devices to provide their MAC addresses in order to access the Wi-Fi network. Typically, MAC filtering is not enabled and the printer is accepted. Otherwise, you can disable filtering or enter the printer’s MAC address in the system . Search for it directly on the device and enter it in MAC filtering. This also helps prevent unwanted printer access.

Printer IP address not found

In order for all devices, i.e. your computer, printer, and router, to cooperate, you must have a correct IP address. Normally, the address is provided to you by the setup software installation wizard. If not, you need to manually configure and correct the IP address of your printer. Since the procedure to follow depends on the device, it is best to consult its user manual to proceed correctly.

The printer has access to the network but the print request does not reach it You have successfully installed the printer driver and software, the printer has access to the Wi-Fi network but refuses to print? The problem is probably related to the computer’s firewall. This interferes with communication between the printer and the computer. To find out if it is the cause of the problem, deactivate the firewall for a few moments and start printing.

123.hp com/setup 8710 and troubleshooting guide

123.hp.com/setup 6968 | HP Printer Setup & Installation

 123.hp.com/6968 printer is a versatile device with robust functioning and high performance. But sometimes when you acquire a new printer, in addition to configuring the printer which can potentially pose certain difficulties, installing the printers can seriously give you a hard time.

But if you follow this 123.hp.com/setup 6968 guide your new printer setup will likely be smooth and error-free.

Things you should know before installing 123 hp inkjet 6968 printer(123.hp.com/setup 6968)

There is a specific order of steps to follow to install a printer. The installation process can generally be broken down as follows:

  • Connect the printer to the computer
  • Install Printer software
  • Have the printer recognized by the operating system
  • The ink cartridges should also be installed.
  • Connect and install the Wifi printer, if necessary to the wireless internet network
  • Connect the printer to the computer or pc
  • once the printer has been unpacked, placed in the desired location and assembled.
  • First of all, you need to check that you have the connection cable. Very often it comes with the printer, otherwise, you have to buy it by yourself.

Install the ink cartridges before connecting the hp 6968 printer to the computer

  • First access the printer by opening the cover.
  • Take the cartridges, and remove the protective tab.
  • Consult the manual. In general, the procedure to follow is illustrated on a leaflet in each refill that you buy.
  • Carefully insert them into the cartridge box as instructed in the instruction manual.

This is the primary setup of the printer. The next step is to connect the printer to the computer or laptop.

123.hp.com/6968 setup for printer’s connection

There are mainly two connection systems: Wired connection via USB and wireless connection.

Which connection method you choose depends upon your choice and your need.

Depending on the type of connection, the installation steps, which are roughly the same, vary slightly.

Connecting a 123 hp 6968 printer using the USB cable:

  • When ready, connect the printer to power through the power cord.
  • Install the software contained on the CD supplied with the printer or download it first from the hp website.
  • Connect the USB cable to the printer, then to the computer.
  • Turn on the printer using the power button. An LED light should come on.
  •  Wait for a few minutes, while the connection process completes.
  • Once the connection is established, install the printer in Windows

Connect the printer using a wireless network

You can either choose the WIFI direct option or the WPS method.

For the WPS method, press and hold the WPS button on the router to enable it.

Now on the printer press WIFI button. An led light may blink indicating that WIFI is powered on.

Your printer will search the network.

When it finds your network, it will connect to it.

You may be prompted to enter the network key.

Once the connection is established, your printer is ready to print over a wireless network.

Add the 123 hp 6968 Printer to the windows

Once the printer is connected to the PC(123.hp.com/setup 6968), the next step essentially concerns software recognition of the device.

  • As soon as we connect the printer to the computer, Windows should recognize the new hardware by itself.
  • Regarding the window’s operating system, for example, you will see a window appear on your screen.
  • There, you should select the option not now. Before clicking on “Next”, you will need to insert the CD supplied with the printer in order to continue.
  • Now you don’t have to do anything. The rest will be done by the operating system.
  • You may be asked to choose where to download the drivers. Then, you will have to continue the process by clicking on “OK”.
  • The procedure is automatic, you must click OK or continue then wait.
  • Finally, a small window at the bottom right will tell you that the new device has been recognized and ready to be used.

What to do if the computer does not recognize my printer(123.hp.com/setup 6968)?

This can happen with older operating system versions and sometimes even with the newer versions too.

  • Sometimes, the computer may not recognize the new printer automatically.
  • In this case, you must, therefore, install the printer manually.
  • First, insert the CD that came with the printer, then go to Control Panel. You can access the control panel via the START button.
  • In the control panel click on “Printers and devices” then on “Add a printer.
  • If, you are using the professional version of XP, the older version of windows, on the click on “Printers and Faxes”.
  • If the printer is not on the network, i.e. it is only used by the computer to which it is connected, the checkboxes will be different.
  • Now click on the “Next” button. The system will automatically search for the printer and, once it has found it, all you have to do is follow the instructions and wait for the installation to finish.
  • But If you are using a network printer, you must choose the option “network printer or a printer connected to another computer”. Then find the printer you are trying to add and click on add Printer.
123.hp.com/setup 5055 | HP Envy 5055 Setup guide

123.hp.com/setup 5055 | HP Envy 5055 Setup guide

Setting up the 123.hp.com/setup 5055 all in one printer is easy and requires a few simple steps.

Hp as always brings it’s hallmark quality and features with the new hp envy 5055 Printer. It’s sophisticated features, beautiful design and robust functioning make it one of the best Printer to buy.

Hp envy 5055 setup for the WIFI connection( 123.hp.com/setup 5055 )

This is a bit complicated but at the same time the most reliable method to connect the 123 hp envy 5055 printer. You do need the network name and password.

  • Turn on the printer and go to the control panel. Before you do this, you should also know both the name (also called SSID) of your network and the associated password. If you do not know this data.
  • Now press the “Setup” button on the printer control panel and then go to “Network”.
  • At this point, the printer should show you all network sources in the vicinity. Choose the name of your network or, if you cannot find it, enter it manually at the end of the list. Make sure that the letters are case sensitive, otherwise, the connection cannot be established.
  • After you have selected your network, you will be asked to enter the password. Again, think of an exact spelling. Once this step is complete, the printer should automatically connect to the network, including your laptop. You can now print without being connected to the printer with a USB cable.

123.hp.com/setup 5055 Printer via HP wireless connection

With the so-called HP wireless connection, you can skip the steps when entering the network name and password. To do this, however, both the printer and the laptop must be compatible with this technology. The following conditions must be met for the HP wireless connection:

  • At least Windows 7 or macOS X 10.5 is installed on your laptop.
  • The connection between the laptop and the network is wireless.
  • Make sure that the printer is in the “HP Auto Wireless Connection” status. This is automatically the case when you turn on the printer for the first time or try to connect to the network.
  • If you see the automatic wireless connection after turning on the printer, consider using this option. Before following the steps below, however, you should make sure that no downloads are in progress or that you are doing other important work on the Internet. The connection to the Internet is disconnected once during setup, which prevents access to the Internet during this time.
  • Install the hp envy 5055 Printer software on your laptop that came with your printer. Simply follow the instructions that are displayed during the installation.
  • At some point, you will be asked to choose a connection type for the network setup. Select “Network (Ethernet / Wireless)” and then the option to automatically send your wireless settings to the HP printer.
  • You don’t need to do more at this point, as the rest is done by HP software. Settings regarding the network name and password are omitted.

Setup via WPS setup

WPS (Wi-Fi Protected Setup) is used to connect network-compatible devices with one simple push of a button. In order to be able to use this method, however, some basic conditions must be met once again:

  • Both your HP printer and the wireless router must support WPS. You will usually find out whether this is the case in the manual. Alternatively, a large button labeled WPS is a safe indicator.
  • The router must use WPA or – better – WPA2 as the encryption method for the password. This is the case with the vast majority of routers. Older devices that only use WEP encryption or a similar method are not compatible with the WPS setup.

The setup via WPS setup is then very simple just follow the steps;

  • First press the WPS button on your 123 HP envy 50555( 123.hp.com/setup 5055) printer. The easiest way to find out whether there are other small things to consider is in the manual.
  • Within the next few minutes – and preferably as soon as possible – press the WPS button on your router. If in doubt, hold it down for a few seconds if the connection doesn’t work.
  • Normally, the connection between the printer and the laptop (or more precisely the network) should now be established automatically.

123.hp.com/5055 setup for printing from mobile

Quick and hassle-free printing is the demand of most of the users around the world and mobile printing is what gives them just the right tool to do so.

Hp understanding this need does not lag behind and offer comprehensive tools and features to connect the hp printers to the mobile device. Be it Android platform or the iOS, connecting the hp printer to these devices is very easy.

Hp envy 5055 setup for iPhone through apple’s AirPrint

Apple’s AirPrint is a utility suite that is inbuilt in the MAC as well as iOS devices. Airprint facilitates connecting the printer as well as printing without the need for downloading and installing any extra application.

All the latest hp printer supports the apple’s AirPrint and with your 123 hp envy 5055( 123.hp.com/setup 5055) print you don’t need to worry about the AirPrint compatibility issues.

  • Turn on the WIFI of your iPhone.
  • Press the wireless button on your printer. You can also do so via the control panel of the printer.
  • Your printer will search and find the wireless network of your iPhone and then connect to it.
  • Make sure that your printer and the iPhone is connected to the same wireless network.
  • Now select the document or photo you want to print.
  • Click on the share button, now select the print option.
  • You will be asked to select the printer, if your hp envy 5055 is setup and connected correctly, you will see it listed.
  • Select your printer and then print the photos or documents.

Hp envy 5055 setup for android device

  • Connect the hp printer on your android phone’s WIFI network.
  • Go to google play store and download the Hp print service plugin
  • Go to settings and enable the plugin.
  • Now just select the document and choose the print option from the drop-down menu.
  • Select your printer and start printing.

Hp envy 5055 setup for ePrint

Hp ePrint is the cloud-based service offered by Hp which gives you the freedom to print from anywhere as long as you have access to the internet.

  • Locate the hp ePrint button on the printer.
  • Ensure that your computer and the printer have access to the internet.
  • Enable web services from the control panel of the printer.
  • Now you just need the email address of the printer.
  • You just have to send the document or photos over the mail for printing.
  • Just make sure that the documents and photos do not exceed the 10 MB size.

Whenever you send the email, it should have a proper subject, or the print job may be canceled by the ePrint server.

If You are still facing issue with your HP printer You can also call our toll free number +1-833-283-0002.

123.hp.com/setup 3830 setup | Basic installation and troubleshooting

123.hp.com/setup 3830 setup | Basic installation and troubleshooting

123.hp.com/setup 3830 guide will provide you all the steps necessary to set up your printer and make it up and running in no time.

  • Remove your HP printer from its packaging and remove all of the sticky paper and protective materials.
  • Also, be sure to remove any protective material inside the printer that is used to protect your printer during transportation.
  • Consult the user manual to make sure you don’t forget anything.
  • Insert the plug into the outlet to power the printer. Then turn on the printer.
  • Choose the appropriate language on the screen depending upon your country of origin.
  • Open the ink cartridge door and insert the cartridges. Make sure you insert them correctly.
  • Load a stack of paper. The printer is now ready to use.
  • If you want to connect the printer via USB cable then insert the USB cable in the USB port of Printer and the computer.

Install the software for the 123 hp Officejet 3830 printer

Your 123.hp.com/setup 3830 Printer is now connected.

We will now make sure that your computer can control the printer. To do this, you need to install the HP EasyStart software.

  • Enter 123.hp.com/3830 in your browser.
  • Enter the name of your printer model.
  • Here you will see the list of available downloads for your printer model.
  • Download the required software.
  • Open the file you just downloaded.
  • Select “Full Software and Drivers” or “Basic Drivers”.
  • Install the software and the drivers.

Wireless network connection for your 123 hp 3830 Printer

Depending upon your choice, you can either opt for a wired connection or wireless network connection for your hp OfficeJet 3830 Printer.

Establish the connection via Wi-Fi

There are two ways to connect your printer to Wi-Fi. The easiest method is to connect your printer to Wi-Fi using the HP EasyStart software installed on your PC.

  • First, ensure that you have access to your WIFI network.
  • Open the HP EasyStart software you just installed and select “Wi-Fi connection”.
  • Select, establish a wireless connection with your printer”.
  • Follow the on-screen instructions. Your printer will then be automatically connected to your Wi-Fi network.
  • Print something to check the connection

The second method to connect the printer over a WIFI network

  • You first need to have the network name and password.
  • Use the navigation keys to go to “Settings” on your printer, then to “Wi-Fi settings”.
  • Select the Wi-Fi configuration wizard.
  • Select the name of your network. It is also sometimes called SSID.
  • Sometimes you have to enter the name of the network manually.
  • Enter your Wi-Fi network password.
  • Press the OK button.
  • Wait now, the printer will connect to the network, which may take a few minutes.

123.hp.com/3830 troubleshooting

A printer can often show errors or may not function properly. One of the most commonly occurring errors is the printer is offline.

Here you will find general solutions in case your printer is displayed offline for an extended period of time.

The solution to the problem is often very simple. In case of difficulties, contact the support service of your manufacturer.

The offline printer USB connection( 123.hp.com/setup 3830 )

If your printer 123.hp.com/setup 3830 is connected by USB to your computer and is displayed offline, follow the below steps:

  • Check if your printer is switched on and correctly connected. Errors in the USB device driver are indicated by a yellow symbol at the bottom right of the taskbar. Try plugging the printer into another USB port on your computer.
  • If your printer or your computer, switched to power saving mode during operation, this may also explain why the printer is displayed offline. In this case, restart the printer and reconnect it to the computer.
  • Go to the control panel, click on “Show devices and printers” and then right-click on your printer to display a status window. There you will find the “Printer properties” menu. Now check the “Allow” box in the “Security” tab. This will probably bring back the printer online.
  • Sometimes it may be useful to reinstall the printer driver and then re-register the printer with the driver installed in the system. A corrupt driver can also cause the printer to go offline.

123.hp.com/setup 3830 printer offline connected wirelessly

Network problems are the most common cause of offline display of a wireless printer 123.hp.com/setup 3830 .

  • Make sure your printer is on and check the wi-fi indicator on your router.
  • Your printer can only be displayed online if your router is turned on and wi-fi is correctly activated.
  • The printer must be on the same Wi-Fi network as your computer.
  • Re-enter your router’s password and IP address on the printer or in the software. Your printer can only be registered with the correct password and IP address. It will then appear online and you can again start printing.
  • Check if there is an error code displayed on the screen of your device many a time, problems with the printer’s accessories results in the offline error.
  • Check that there is enough paper loaded in the printer and that there is no paper jam.
  • View your devices and printers in the printer software or Windows Control Panel and exclude general error messages. Error message explains a lot about what problem the printer is encountering.
  • Check if you have enabled Wi-Fi on the computer.

If You are still facing issue with your HP envy 3830 printer, You can also call us on our toll free number +1-833-283-0002.

123.hp.com/setup 6970 | HP officejet printer 6970 setup & installation

123.hp.com/setup 6970 | HP officejet printer 6970 setup & installation

Knowing how to configure your 123.hp.com/setup 6970 printer when it is connected to the laptop or the computer is very simple. Some ink printers or laser printers have drivers or drivers. If you follow the right steps your new Hp 6970 printer will be up and running in no time.

Primary USB setup for the 123 hp 6970.

  • Turn on the printer and the computer.
  • Use the appropriate cable to connect the printer to the computer.
  • If you are connecting the printer via USB cable insert both ends of the USB cable in the required port.
  • At this point, your computer may request for driver installation, proceed to install them.
  • You can do so either through the installation disk that comes with the hp 6970 printer or you can download the required software and drivers from the internet.
  • Go to 123.hp.com/6970 page and download the software and drivers.
  • Once the download is complete install the drivers.
  •  Once the installation is complete, the program will ask you to print a test page to verify that it is really well configured and that the printer works properly.
  • Besides, it will allow you, through the “printer configuration” option, to make the changes you want in it, if you consider it necessary.

Adding the hp 6970 Printer manually to the windows computer

If after connecting the printer and the computer through the cable the printer has not been configured and added directly, you will have to do it manually.

  •  To do this you will have to access the Control Panel and click on Printers or Devices and Printers.
  • Once inside the menu click on Add a Printer.
  • Choose your printer and follow the steps.
  • Then press on the add button.

How to configure the 123.hp.com/6970 printer wirelessly to a computer with Windows OS?

Connecting a printer wirelessly printer is practical. Not only because avoiding connection cables prevents tangles and allows for better cleaning and ordering of the workspace. Also because it allows having this peripheral separated from the work table, leaving it free for other devices.

Follow the steps below to connect the printer wirelessly:

  • Currently, almost all printers can be connected via WIFI to an all-in-one, laptop or another type of computer and hp Officejet 6970 pro 123.hp.com/setup 6970 is no exception.
  • Place the printer in a place where it has access to the Wi-Fi signal, just like your computer. Although both devices are remote, both must have access to the same wireless network to install the printer correctly.
  • You can also opt for the WPS method, for this, you have to ensure that your router supports the WPS( WIFI Protected Setup) and has a physical WPS button.
  • Enable the WPS button on both the printer as well as the router.
  • Wait for the printer to search for your network and connect to it.

Add the wireless 123 hp printer to your computer

You can use the Windows wizard Add a printer and let yourself be guided by its steps.

  • Press the start button to enter the start menu and open the Control Panel. If your OS is a Windows prior to Windows 10 simply access the Control Panel through the start menu.
  • Choose the Devices and printers or View devices and printers option.
  • Select Add a printer at the top of the window.
  • Choose  Add a network, wireless or Bluetooth printer.
  • Choose network printer from the list and click on Next.
  • Make a test print to verify that everything is correct and working fine.

123.hp.com/setup 6970 (Hp 6970 Officejet printer setup for MAC

Setting up a printer on a Mac network is also simple. If you have a Mac Book and you want to configure your printer on this, you will see following this step by step is really simple and fast.

  • Click on the Apple menu first and in it on System Preferences.
  • Click on the Print and scan option.
  • Click and hold the “+” button at the end of the list of printers and select the printer you are interested in adding from the menu shown on your screen.
  • In case that the printer you want is not displayed, do not worry; Simply click on the IP box at the top of the Add Printer window and enter the IP address of the printer in the Address field.
  • Click on Download and install, if requested by the computer. It is very likely that your computer already has the necessary program to configure the printer. If not, it will be allowed to download the drivers or drivers easily from the Apple website.
  • Perform a print test to verify that everything is correct.

How to configure the hp printer to be shared by multiple Windows OS computers?

If you want to share the 123.hp.com/setup 6970 (123 hp setup com 6970) Printer over multiple computer systems, like in the office environment, you can do so. Just follow the below steps;

  • Access the Control Panel.
  • Click on Devices and printers or on View devices and printers.
  • You have to right-click on the shared printer and select Printer Properties.
  • Click on the Share box, select the Share this printer box and click  Apply.

If you are still facing issue with your HP Printer you can also call our toll free number on +1-877-364-5922.