Epson Printer Setup

HOW CAN WE INSTALL AN EPSON PRINTER?

For Installing  Epson printer for windows, you can follow the following mentioned steps:

1.Turn the Epson printer on.

2.Open the official website of Epson and select for downloading and installing the Windows version of Epson Connect printer setup utility.

3.Checkmark the agreement and select NEXT option.

4.Click on the INSTALL option.

5.You will then find a list of products on the menu, choose your product in the menu and then select NEXT option.

6.Now, click on Printer Registration and then click on Next.

7.Then, click on AGREE and again click on NEXT.

8.You will then see a ‘Register a printer to Epson Connect’ appear on the screen. Click on OKAY then. 

9.Now, you can either create a new account or continue with the existing one by signing up.

10.Now select CLOSE.

INSTALLATION OF EPSON PRINTER FOR MAC

1.Switch on your Epson printer.

2.Open the official website of Epson as done earlier for windows. Now go on to downloading and installing the Mac version of Epson Connect Printer Setup Utility.

3.Click on Continue option

4.Again click on the option of CONTINUE and then click on Agree.

5.Then click on INSTALL and then select CLOSE.

6.Now choose your printer and then select NEXT.

However, if you don’t find any window pop-up, you can do the installation of Epson printer by opening Finder and then clicking on the APPLICATION option. Here, click on Epson Software and then click on the Epson Connect printer setup.

7.Select Printer Registration and then make a click on Next, then select OK.

8.Tick mark the checkbox ‘I accept the terms and conditions’ by scrolling the content down, then select NEXT.

9.You can either create a new account and continue with the existing one.

10.Select CLOSE. 

HP Deskjet 3755 to wifi mac

How To Connect HP Deskjet 3755 To Wi-Fi Mac? 

To connect your HP printer with a Mac system, complete the following steps:

Step 1: Installation Process:-

  • Before proceeding, make sure your computer system and the printer meets all the requirements for the installation process. 
  • Switch on your computer system, router and set up your printer. 
  • To set up your printer on the wireless network, make sure you have proper internet access and the computer system is connected to the wireless network. 
  • Ensure your computer system and your HP Deskjet 3755 have the same wireless network connection. 
  • Put papers in the input tray, insert the ink cartridges in their place. 
  • Switch on your HP Deskjet 3755 printer and put it near the computer system and within the range of your Wi-Fi network. 
  • Remove all the USB cord from your printer, if not required. 

Step 2: Reset Wireless Settings:-

  • Check if the wireless light is flickering and press the power knob if the light of the power button is not bright to switch the printer from sleep mode. 
  • Press the wireless and cancel button simultaneously if the wireless button isn’t blinking. 

Step 3: Driver and Software Installation:-

  • After downloading the software, go to the “HP Easy Start”.
  • Choose the “Set Up” option. 
  • Choose the “Accept” option to agree to all the terms and conditions. 
  • In the Connect dialogue box, choose your printer and then hit on “Continue” option. 
  • In the next dialogue box, you will see that your HP Deskjet 3755 and wireless network have a “Join” option between them. 
  • Select the “Join” option if the name of your printer and Wi-Fi is correct. If not, then click on the drop-down option and select the correct name of your printer and the Wi-Fi. 
  • Now, select the “Allow” option to permit the HP Easy Start for accessing your Wi-Fi network. 
  • When your printer is connected to the network you will see a checkmark between them. 
  • Tap on “Continue”.
  • Now install the required software and then hit on “install”.
  • Complete the steps shown on your screen. 
  • Print a test page.

HP Envy 4520 printer to WIFI

How do I connect HP Envy 4520 printer to WIFI network

All Hp envy wireless printer setup only requires a few simple steps for proper configuration.

In this guide, we are going to explain in full details, all the methods for Hp Envy printer wireless connection in a step by step format.

How to setup Hp envy 4520 printer over a wireless network?

Before you start the Hp envy wireless printer setup, you ensure that you meet all the requirements for printer wireless setup and you have all the network settings, that you may have to provide further down the process.

Here are are going to briefly explain what you will need to make sure you go through it and then prepare beforehand.

  • Ensure that your wireless router is functioning properly and is in power-on state.
  • Detect the name of your network and the network key. 

These are some basic requirements that one must meet before go for a hp printer wireless connection process.

Wi-Fi Protected Setup ( WPS )

If your HP printer and system meet all the necessary requirements, WPS will be the most easiest method to connect your Hp envy 4520 wireless printer with the computer.

  • WPS methods baiscally need a physical WPS push button on your wireless router.
  • Your HP Envy 4520 printer support the WPS method (Go through the user manual) so that is the advantage.
  • Your network must be protected with the WPA or the WPA 2 security protocol.
  • Proceed for printer connection process when you have ensured all the requirements.
  • Make sure that the printer is connected to the power supply and is switched on.
  • Now press the WPS button on your router.
  • Press the WPS button on your router after two or three seconds. You may have to keep pressing the push button again and again for few seconds to activate the WPS feature.
  • You have to search for the network on the printer and establish the connection.
  • Try to Print something to test that the printer is correctly configured or not.

Hp Wireless Setup Wizard for wireless connection

This type of method is only supported by the hp envy printers with the display. Now hp envy 4520 is equipped with a printer display, you can opt for this method for the wireless connection of your HP printer.

  • Press the network icon and go to settings on the control panel of your hp printer.
  • Choose the wireless setup wizard option from the network settings menu.
  • Your printer will show you the names of the network it detected within the vicinity.
  • Find and select your network.
  • You have to go to the bottom of the list and enter the name. You have to ensure that you have entered the name exactly as it is.
  • After that, the setup will ask for the network key. Here again, enter the exact characters as they are minding the upper and lowercase too.
  • When done, your printer will connect to the wireless network and will be ready to take the print command.

These are all the simple methods that you can use for the wireless connection of your Hp envy 4520 printer. If you follow all the given steps exactly as mentioned, we are sure you won’t face any problem and your printer print perfectly fine. In case of any further difficulties go directly to the Hp website for additional help.

How To Connect HP Deskjet 2622 To Wi-Fi?

Wireless printing eliminates the clutter created by messy cables and free the user from the confinement of printing from a single connected device. A wireless printer can connect to a mobile device with the same ease as it connects with a desktop or laptop. This simple post on how to connect Hp DeskJet 2622 to wifi will be very useful if you are attempting a new Hp printer wireless connection or if there is a connection error with a previously connected wireless DeskJet 2622 printer.

Pre-requisite for wifi connection
● Make sure you have the network information that is, the network name and its passcode.
● Your router is powered On and can access the network.
● The printer is placed within the vicinity of your router’s range.
● WiFi direct is disabled, as it won’t allow the wireless connection.
● Press and hold the wireless button and resume button at the same time to disable WiFi direct

Bring the printer to setup mode
For the first time installation, the hp printer remains in setup mode for two hours. In case you are reconnecting your hp DeskJet 2622 then you need to reset the network setting and configure the printer to setup mode.
● On the printer’s control panel press and hold the WiFi and cancel button simultaneously.
● Hold them both until you see the power button starts flashing.
● Release the button. The Hp 2622 DeskJet printer is now in setup mode and you can connect it to wifi.


Simple methods to connect Hp DeskJet 2622 printer to a wifi network

  1. Download and install the printer-specific drivers and software on your PC.
  2. Connect the printer to the same wireless network as that of your PC.
  3. Launch the printer software application, and on the connection screen select wireless.
  4. Follow instructions to finish the procedure, then close the application.
    Connect Hp DeskJet 2622 printer to WiFi via WPS
    You can easily connect the Hp printer to wifi using WPS (WiFi Protected Setup) connection mode:
    ● To enable the WPS mode press and hold the wireless button for about five seconds.
    ● The printer will remain in WPS mode for two minutes, so promptly press the WPS push button on your router too. Also hold it for two to three seconds to enable and initiate a WPS connection.
    ● If everything goes correctly, the wireless light will stop flashing indicative of a successful connection.

Connect Hp DeskJet 2622 printer to wifi using Hp smart app
● If you don’t have the Hp smart app download and install it from the Hp download webpage.
● When installed launch the app on your PC and Click on Printer’s icon. You will find it on the left panel of the screen.
● Select set up a new printer option. It will enable the discovery mode for your wireless network.
● The app will instruct you to download and install Hp printer drivers and software if not already installed.
● Click on the Continue button on the screen.
● Choose your Wi-Fi network, and provide the password if prompted.
● Now sit back. The rest of the process is automatic. The app will begin the setup process.
● If your printer is in Wireless setup mode it will detect the network and connect to it.

123.hp.com/ojpro 6978

123.hp.com/ojpro 6978 printer Setup & Installation

Hp has developed several useful apps to assists its users with printer Setup and Installation. With hp easy start and hp smart, you can easily configure and install your 123.hp.com/ojpro 6978 printer. For the latest hp 6978 printer software and drivers download you can always head to the hp website.

123.hp.com/ojpro 6978 – Primary setup

Remove any packing material and sticking tape that your printer came in.

Apart from the printer, there will be, power chord, USB cable, ink cartridges instruction manuals, and installation CD. Check that nothing is missing.

Connect the printer to the power supply, wait for it to align all its components, and then open the ink cartridges compartment.

Remove the packing of the ink cartridges, and properly insert them in the corresponding slots. Check the instructions manual in case you have any trouble.

Open the paper input slot, adjust the width by sliding the paper width guide, and then load a stack of paper.

Use the USB cable to install your hp 123 Officejet Pro 6978 printer

  • Open a browser and enter 123.hp.com/setup.
  • This link will take you to the hp download page, click on the download button to download hp easy start file.
  • Double click on the file to extract and install the hp easy start software on your computer.
  • Now connect the USB cable to your computer and the printer. Launch the hp easy start, the software will detect the printer and show it on the screen.
  • Click on the continue button. The hp easy start will search for the latest software and drivers available for your printer.
  • When it finds the recommended software, click on the continue button to start the download.
  • When the download is complete the installer extracts the files and launch the installation.
  • When the installation is complete, your printer will be ready, and the hp printer assistant app will launch to further assist you with printing.
  • If your printer is not detected by the software go to the hp website and download and install the software and drivers for your hp printer’s model.

Setup hp Officejet pro 6978 wireless connection using Hp smart app

  • Go to 123.hp.com and download the hp smart app. When the download is complete install the app and launch it.
  • Switch on your printer. By default, the hp printer remains in Wireless setup mode for two hours after it was powered On for the first time.
  • But to manually connect the printer to the network, in case your printer does not support automatic wireless setup mode, go to the hp Officejet 6978 control panel’s display and select the wireless setup wizard.
  • The printer will search for the network and display it on the screen. Click on the name of your network.
  • When your printer is connected to your network, click on the plus sign button on Hp smart app screen to add the printer.
  • The app will detect the printer on your network and the display is on screen.
  • If your printer is not displayed, click on setup a new printer.
  • Now click on your printer’s model, and then click on the continue button.
  • A message will pop up asking permission to automatically access your wifi information. Click on the continue button to confirm.
  • Hp smart app will gather the network information and then complete the connection process.

Setup the Hp Officejet Pro 6978 printer on an android device

  • Enable the network setup mode through the printer’s control panel as mentioned above.
  • Open Google Play Store now, and install the hp smart app on your android phone.
  • Open the hp smart app and click on the continue button.
  • On the next screen click on the add printer button and then choose, Setup a new printer.
  • Click on your Printer’s name, and if asked to enter your network name and password.
  • Hp smart app will find the printer, when it will have all the information about the network, it will connect the printer and finish the installation.
  • Close the app and open the Google Play Store again.
  • Search the Hp print service plugin and install it.
  • Go to your phone’s settings, find the hp print service plugin, and enable it.

Setup the Hp Officejet Pro 6978 printer on an iOS device

  • Download and install the hp smart app on your iPhone and open it.
  • Enable the wireless connection mode on your 123.hp.com/ojpro 6978 printer.
  • Click on the option for setting up the printer on hp smart app and click on the continue button.
  • Now tap on the yes button to permit to bring the printer to the same network as your iPhone is.
  • Select your home network and enter the password. Now tap on Next to connect to the network.
  • The app will find the printer, connect it to the wireless network, and will display setup complete message.
HP Deskjet 2652

Complete setup guide for 123.hp.com/dj2652 Printer

This guide will walk you through the whole 123.hp.com/dj2652 Printer Setup process. Make sure you follow each step in the sequence given here to avoid any blocks during the hp DeskJet 2652 installation.

The hp DeskJet 2652 model is an entry-level all in one printer, design to handle the basic day to day printing requirement and comes with print, scan, and copy capability. The printer supports both the wired and wireless connection type and even accommodate the latest hp auto wireless connect feature.

  • When you open the printer’s package box, you will find-
  • Hp driver and software installation media, usually a CD.
  • One power chord with an Adaptor, to connect the printer to the power supply.
  • A USB cable for connecting the printer to the computer.
  • Two ink cartridges, one for black and white printing, and one for coloured printouts.
  • User manual and setup guide for the Hp DeskJet 2652 printer.

All the mentioned accessories are necessary for the proper setup of your new hp printer. Although highly unlikely but if you find anything missing contact the vendor or the online marketplace from where you made the purchase, at the earliest, to get the printer package replaced with a complete set.

Hardware setup for hp DeskJet 2652 printer

  • Carefully remove the printer from the box and put it on a flat leveled surface.
  • Remove any sticking tape or packaging you find on the printer.
  • Pull open the ink cartridge cabinet, you will find sticking tapes there too, remove them.
  • When the printer is free from all the packaging material, insert the power chord in the power port, and then connect it to the power supply.
  • Switch on the printer, it will make some noises, don’t worry it’s the printer’s part aligning themselves.
  • The next step is to insert the ink cartridges but you must wait till the printer becomes idle, that is you don’t hear any noise coming from it.
  • Bring out the Cartridges from their packing, hold them carefully, and avoid any contact with the ink nozzle once you have removed the protective tape from them.
  • Now push the Cartridges inside their cabinet with ink nozzle pointing towards the printer. When you hear the snap sound, it means the cartridge is properly fitted in its place.
  • After this, raise the paper input tray, push the paper width guide to the left, and load some papers into the tray.
  • Slide-out the paper output tray and the extender. This completes the 123.hp.com/dj2652 printer hardware setup.

123.hp.com/2652 printer software setup

Once you have done the hardware part, move on to set up the hp printer software. Continue to the guide and you will learn how it is done.

  • Insert the software installation CD in the optical drive and let the setup install the hp printer software and drivers onto your computer.
  • Alternatively, you can download the software by visiting the 123.hp.com/setup or the 123.hp.com/setup 2652 page. The main benefit is that you will get the latest version.

Start the Hp DeskJet 2652 printer connection

Once you have completed the hardware and software setup for your hp 123 DJ 2652 printer, now it’s ready to connect to your computer. For the connection part you have two options:

  1. Wired connection via USB cable
  2. Wireless connection through your computer’s WIFI network.

The wireless connection also gives you two options, you can either connect through the Hp auto wireless connect which collects all your network information through your router to connect or you can opt for the WIFI Protected Setup, which employes the router’s WPS feature.

Wired Connection Via USB Cable

After the DeskJet 2652 software installation, run it, and when the connect screen appears, choose the connection type as USB.

  • Now insert the USB cable into the USB port of both the printer and your PC.
  • Wait for sometimes, you pc will check the connection status, setup the USB drivers and when done, will display the message, “the printer is ready.

Wireless connection with Hp auto wireless connect

On the connection window of the hp software choose the connection type as wireless and then click on the Hp auto wireless connect option.

  • For this connection type to work your PC’s operating system must have full control over the router as the network check will collect the required network settings to connect to your network.
  • Also, check that the led indicating the wireless connection is blinking.
  • Just the on-screen prompts and your printer will do the rest.

Wireless Connection Via WPS

Your router must have a WPS button for this connection type to work, so check it before proceeding.

  • Place the printer within the range of your router’s WI-FI network.
  • Now hold the wireless button on your hp Desk Jet 2652 Printer’s control panel till the LED indicating the wireless connection start flashing.
  • Now press the WPS button on your router and hold it for some time.
  • When the WPS connection is initiated, your printer will look for the network, and connect to it.
  • If the connection was successful, the wireless LED should have stopped flashing.
123.hp.com/ojpro 6978

123.hp.com/ojpro 6978 printer Setup & Installation

Hp has developed several useful apps to assists its users with printer Setup and Installation. With hp easy start and hp smart, you can easily configure and install your 123.hp.com/ojpro 6978 printer. For the latest hp 6978 printer software and drivers download you can always head to the hp website.

123.hp.com/ojpro 6978 – Primary setup

Remove any packing material and sticking tape that your printer came in.

Apart from the printer, there will be, power chord, USB cable, ink cartridges instruction manuals, and installation CD. Check that nothing is missing.

Connect the printer to the power supply, wait for it to align all its components, and then open the ink cartridges compartment.

Remove the packing of the ink cartridges, and properly insert them in the corresponding slots. Check the instructions manual in case you have any trouble.

Open the paper input slot, adjust the width by sliding the paper width guide, and then load a stack of paper.

Use the USB cable to install your hp 123 Officejet Pro 6978 printer

  • Open a browser and enter 123.hp.com/setup.
  • This link will take you to the hp download page, click on the download button to download hp easy start file.
  • Double click on the file to extract and install the hp easy start software on your computer.
  • Now connect the USB cable to your computer and the printer. Launch the hp easy start, the software will detect the printer and show it on the screen.
  • Click on the continue button. The hp easy start will search for the latest software and drivers available for your printer.
  • When it finds the recommended software, click on the continue button to start the download.
  • When the download is complete the installer extracts the files and launch the installation.
  • When the installation is complete, your printer will be ready, and the hp printer assistant app will launch to further assist you with printing.
  • If your printer is not detected by the software go to the hp website and download and install the software and drivers for your hp printer’s model.

Setup hp Officejet pro 6978 wireless connection using Hp smart app

  • Go to 123.hp.com and download the hp smart app. When the download is complete install the app and launch it.
  • Switch on your printer. By default, the hp printer remains in Wireless setup mode for two hours after it was powered On for the first time.
  • But to manually connect the printer to the network, in case your printer does not support automatic wireless setup mode, go to the hp Officejet 6978 control panel’s display and select the wireless setup wizard.
  • The printer will search for the network and display it on the screen. Click on the name of your network.
  • When your printer is connected to your network, click on the plus sign button on Hp smart app screen to add the printer.
  • The app will detect the printer on your network and the display is on screen.
  • If your printer is not displayed, click on setup a new printer.
  • Now click on your printer’s model, and then click on the continue button.
  • A message will pop up asking permission to automatically access your wifi information. Click on the continue button to confirm.
  • Hp smart app will gather the network information and then complete the connection process.

Setup the Hp Officejet Pro 6978 printer on an android device

  • Enable the network setup mode through the printer’s control panel as mentioned above.
  • Open Google Play Store now, and install the hp smart app on your android phone.
  • Open the hp smart app and click on the continue button.
  • On the next screen click on the add printer button and then choose, Setup a new printer.
  • Click on your Printer’s name, and if asked to enter your network name and password.
  • Hp smart app will find the printer, when it will have all the information about the network, it will connect the printer and finish the installation.
  • Close the app and open the Google Play Store again.
  • Search the Hp print service plugin and install it.
  • Go to your phone’s settings, find the hp print service plugin, and enable it.

Setup the Hp Officejet Pro 6978 printer on an iOS device

  • Download and install the hp smart app on your iPhone and open it.
  • Enable the wireless connection mode on your 123.hp.com/ojpro 6978 printer.
  • Click on the option for setting up the printer on hp smart app and click on the continue button.
  • Now tap on the yes button to permit to bring the printer to the same network as your iPhone is.
  • Select your home network and enter the password. Now tap on Next to connect to the network.
  • The app will find the printer, connect it to the wireless network, and will display setup complete message.
hp-printer

6 Simple Steps for 123.hp.com/dj 2623 printer Setup &Installation

One could easily set up their new hp DeskJet 2623 printer, the only requirement is to follow one step after another. First hardware setup, then software installation, and then the printer’s connection to the computer. You can easily download the software and drivers from the 123.hp.com/2623 page, if you don’t have the installation media and to complete the remaining steps, Just follow this simple guide.

Step 1: Gather the components and prepare the hardware

  • For your new hp DeskJet 2623 printer,  you should make sure to remove all the packing tape first.
  • Note that the inside of the printer also has adhesive tape and more packaging material that can be easily overlooked. This could jam the paper when printing, so pay attention to this and check the inner compartment too.
  • Check to ensure that you have all the components which include cables and manuals that are listed in the box. These are needed for the Setup so check that you do not lack anything.
  • To begin, carefully take the printer out of the box and once everything is removed, place your printer in a horizontal position.
  • Gently lower the output tray, reach into the printer, then grasp the handle and lower the ink cartridge access door to open it.
  • Remove any packaging material you find here too and then close the access door to the ink cartridges.

Step 2: Connect HP Deskjet 2623 to the power supply

  • Locate the printer’s power cord between the components that you took out of the box. You will easily recognize it because one end has a standard electrical plug that goes into the power socket.
  • Now Go to the back of your printer and connect the power cable. The port is shaped like a number “eight” matching the end of the power chord.
  • Now Connect the power chord to a power source and press the ” ON ” button to switch on the printer.

Step 3. HP Ink Cartridges for HP Deskjet 2623 Printer

Your 123.hp.com/dj2623 printer uses two HP 65 ink cartridges. One black ink cartridge for normal black and white printing and one tri-color cartridge for colored printing.

  • The HP ink cartridges will be included in the box with your printer, find them, and remove their packaging. Be careful to only touch the plastic part on the ink cartridge
  • Lower the ink cartridge compartment door. You will see that the rail with the cartridge holder will move to the center.
  • You should wait until any moving part of the printer comes to completely still.
  • Once the printer is inactive and silent you can continue. Remove the plastic tape on the ink cartridges to expose the contact head.
  • Hold the cartridge by the sides, with the nozzles facing the printer, and then insert it into the corresponding slot.
  • Now slowly slide the new ink cartridge at a slight upward angle into the empty slot, and then gently push it down until it clicks into place. You will hear a snap sound.

Step 4. Load paper into HP Deskjet 2652 Printer’s paper tray

  • Raise the paper input tray and remove any traces of packaging that may have remained.
  • Slowly slide the paper width guides as far to the left as possible and gently push the stack of paper into the tray till it stops moving any further.
  • Now you may adjust the paper width guide to the right until it contacts the edge of the paper to correctly fit the width of the paper.
  • Lower the output tray and unfold the output tray extender.

Step 5. HP DeskJet 2623 Driver and Software Installation

Please do not try to connect the printer to your computer yet, you must wait until the printer software installation is complete and the software window prompts you to choose the connection type. That is why you do not need to connect even the USB cable yet.

  • Bring out the hp 2623 installation software CD included in the box.
  • Insert the installation disc in the disk drive. Either the Installer will start automatically or you can go to My Computer, locate the DVD drive, open it and run then run the installation program.
  • If case you don’t have the installation software or you have lost it, or you just don’t have an optical drive on your computer, open the following link 123.hp.com/dj2623 in a browser on your computer.
  • Download the hp 2623 printer software and then install it on your computer.

Step 6. Connect your 123.hp.com/dj2623 to your computer

  • For USB connection, when you are prompted to select the connection type on the hp printer software screen, select the USB option and continue the setup.
  • Insert the USB cable in the ports specific for USB on both your computer and printer.
  • Follow the instructions that are displayed on the screen to complete the setup.

Wireless Connection

First, enable the wireless connection feature on the printer. Press and hold the button for wireless connection until you see a light starts flashing.

  • From the connection type screen, on the hp printer software window choose wireless connection, and then if you see the hp auto wireless connection option, click on it.
  • Just do as the on-screen instructions tell you to. Information regarding your network will be exchanged between your computer and the printer.
  • If you don’t have the hp auto wireless connection option, you can opt for the wireless connection using a USB connection.
  • Connect the USB cable and then follow the instruction displayed on the screen.
  • Once the setup is complete remove the USB cable and print something to test the connection is working or not.
123.HP.COM/SETUP

Proven Fixes for Driver Power State Failure on Windows 10 with HP Laptop

The dreaded blue screen of death on hp laptop. The one that renders your laptop completely useless thereby putting a
complete halt on all important projects of yours. Although it sounds like one big of an issue and truth to be told its indication does justify its name as your hp laptop will have nothing but just a blue screen, but when you understand the reason behind this error and how it is caused, fixing it won’t be a problem. Blue screen of death or the BSOD as its commonly known is a frequent occurrence on laptop and computer including hp and usually caused by the Driver Power State Failure. So to get rid of the BSOD you have to understand what driver state power failure is
and how to fix it.
Driver Power State Failure – What is it?
The driver power state failure or controller power state failure as
the name suggest occurs when there is something wrong with the
drivers and the power state of your hp laptop. The issue presents
itself when you let your computer go to sleep mode but it does not
respond to the wakeup call and come back to the normal state
when you try. This creat a conflict that results in your computer’s
operating system responding with a blue screen. Faulty or
outdated display and wifi drivers are the most common culprit, but
other malfunctioning device drivers can cause this error too.
Best Methods to Fix the Driver Power State Failure in hp
laptop
As the most common reason for this error is outdated drivers, so
removing the faulty ones and then updating them to their latest
and compatible versions is usually the best way to fix the driver
power state failure in hp laptops. Other than that there some more
tweaks which you can apply that may help. So let’s jump right to
the solutions and correct this error.
Start the windows in the safe mode

As the blue screen does not let the computer boot properly and
without the working state of your pc it’s not possible to apply the
troubleshooting methods, we bypass the error and boot the
windows in safe mode. This will allow us to make changes and
apply the steps that will help us clear the blue screen and bring
back hp laptop to its normal working state. So first thing first, boot
the windows in safe mode.
● Restart your laptop. Due to the error, you will notice that
instead of booting the system is preparing for automatic
repair.
● Wait a few seconds, the startup windows repair screen will
appear. If your laptop doesn’t show the startup repair screen
restart it again.
● Once the startup repair window opens, select the advance
option, which will take you to another window.
● Here choose the troubleshoot option and under troubleshoot
again select advance option.
● From the advance option list, select startup settings and then
click on the restart button.
● When the windows boot up again, you will see the startup
settings screen with multiple options.
● Now press the number 4 key on your keyboard, this will
select the Enable Safe Mode option.
● The windows will restart again and this time it will boot in
safe mode.
Uninstall faulty drivers
You are in windows safe mode. Although the functionality of the
windows is limited, you can make the necessary changes that will
troubleshoot the issue.
● On your keyboard press, the windows and R key together to
open the Run dialogue box.
● To open the device manager screen type devmgmt.msc in
the Run box and click on the OK button.
● Look for any device listed with a yellow exclamation mark
against it.

● When you find one, right-click it and then from the menu
choose uninstall.
● This will eliminate the faulty drivers and uninstall them from
the system.
Update the drivers
Once you have removed incompatible and outdated drivers, you
can update them to the latest versions.
● Follow the same method as above to open the device
manager screen.
● Again look for the device with the yellow exclamation mark
and right-click them.
● This time select the update the driver software option from
the menu.
● For each driver, you want to update, select Search
automatically for updated driver software option.
● Restart the hp laptop when the whole process is finished and
hopefully the blue screen will be gone.
Adjust the hp laptop performance settings
As the driver power state failure could be due to power issues,
tweaking the laptop performance settings can also fix the error.
You should apply this method only if the issue persists even after
uninstalling and updating the drivers.
● Boot the windows in safe mode by following the method as
explained above and then open the run dialogue box.
● In the search field type powercfg.cpl and hit the enter button
to open the power settings window.
● Here click on change plan settings and then select change
advance power settings option.
● Double click on PCI Express or Graphic Settings or Link
state Power Management option. Only one of these options
will be displayed.
● A drop-down menu will open, select maximum performance
from the list. You should make this change for both the
plugged and battery option.

● Now double click on the power adapter setting and then to
power saving mode respectively and choose maximum
performance. Click on the apply button to apply these
changes.
● These settings will ensure that there will be no power
discrepancies. In simple words, your system will not go to
sleep mode thereby preventing the blue screen.
● Still, it’s not a permanent solution. You should make sure
that all the drivers on your hp laptop are updated to
permanently remove this error.