hp officejet 3830 ink replacement

HP Officejet 3830 Ink Replacement | HP printer setup & Installation

The HP Officejet 3830 offers is your one stop shop for all your printer needs. With its all-in-one inkjet printer with scan and copy capabilities, as well as an automatic document feeder and built-in fax system. The HP Officejet 3830 is compatible with both Windows and Mac OS X. Print speed of 8.5 ppm in black and 6 ppm in color. Mobile Printing available: Print from anywhere using your smartphone with wireless direct printing. Laser-quality documents and lab-quality photos printed straight from your smartphone or tablet. hp officejet 3830 ink replacement is very easy process.Note: the multi-color ink cartridge must be replaced if a single color runs out .

Replace the Ink Cartridges in your HP Officejet 3830 Printer(hp officejet 3830 ink replacement steps:

  • Take out and remove any low or empty ink cartridges
  • Turn your HP Officejet 3830 printer on
  • Insert standard printer paper into the input tray
  • Shut the output tray extender, and the carefully slide the output tray back into the printer
  • Open the printer’s exterior door
  • Open the ink cartridge access door
  • Once you open the ink cartridge access door, the carriage will begin to move to the center; wait until it stops moving before you continue
  • Gently push down on the ink cartridge to release it, and then take the cartridge out from its slot
  • Carefully take out your new ink cartridges from its packaging, and then remove the plastic tape
  • Carefully grip the ink cartridges by its sides with the nozzles facing the printer, and then gently place the ink cartridge into its appropriate slot
  • The tri-color ink cartridge  goes in the slot on the left
  • The black ink cartridge  goes in the slot on the right
  • Push the ink cartridges forward into their slots until it snaps
  • Follow the previous steps to replace the other ink cartridges if needed
  • Shut the ink cartridge door
  • Shut the exterior door
  • Pull out the output tray and the raise the output tray extender
  • Select OK to align the ink cartridges
  • An alignment page should print

Align the Ink Cartridges for your HP Officejet 3830 Printer

  • Take the printed alignment page and scan it to provide the best print quality
  • Raise the scanner lid
  • Put the alignment page with the print side facing down on the glass, and then place it evenly against the guides along the glass
  • Shut the scanner lid
  • Select OK to begin scanning the page
  • This should complete the ink cartridge alignment process and you are all set and the ink replacement is complete

These are all the steps for hp officejet 3830 ink replacement, If you are still facing issue related this you can contact HP official support.